1.1 How do the themes look like

Check the web page with the screen shots. Note that the themes are highly customizable (Customization options).

1.2 Learn about the latest changes

Please refer to the web page with the change log. It is comprehensive and covers everything that goes into every tagged release of the themes.

2.1 Install manually from source

In the following example, we are assuming that your Emacs files are stored in ~/.emacs.d and that you want to place the Modus themes in ~/.emacs.d/modus-themes.

1. Get the source and store it in the desired path by running the following in the command line shell:

$ git clone https://gitlab.com/protesilaos/modus-themes.git ~/.emacs.d/modus-themes

1. Add that path to your known Elisp libraries’ list, by placing this snippet of Emacs Lisp in your init file (e.g. init.el):

(add-to-list 'load-path "~/.emacs.d/modus-themes")

The themes are now ready to be used: Enable and load.

2.2 Install from the archives

The modus-themes package is available from the GNU ELPA archive, which is configured by default.

Prior to querying any package archive, make sure to update the index, with M-x package-refresh-contents. Then all you need to do is type M-x package-install and specify the modus-themes.

Once installed, the themes are ready to be used: Enable and load.

2.3 Install on GNU/Linux

The themes are also available from the archives of some distributions of GNU/Linux. These should correspond to a tagged release rather than building directly from the latest Git commit. It all depends on the distro’s packaging policies.

• Debian 11 Bullseye
• GNU Guix

sudo apt install elpa-modus-themes

guix package -i emacs-modus-themes

2.4 Dealing with byte compilation errors

From time to time, we receive bug reports pertaining to errors with byte compilation. These seldom have to do with faulty code in the themes: it might be a shortcoming of package.el, some regression in the current development target of Emacs, a misconfiguration in an otherwise exotic setup, and the like.

The common solution with a stable version of Emacs is to:

1. Delete the modus-themes package.
2. Close the current Emacs session.
3. Install the modus-themes again.

For those building Emacs directly from source, the solution may involve reverting to an earlier commit in emacs.git.

At any rate, if you encounter such an issue please report it: we will either fix the bug on our end if it is truly ours, or help forward it to the relevant upstream maintainer. Whatever you do, please understand that a build failure does not mean we are necessarily doing something wrong.

Issues you can help with.

3.1 The require-theme for built-in Emacs themes

The version of the Modus themes that is included in Emacs CANNOT use the standard require. This is because the built-in themes are not included in the load-path (not my decision). The require-theme function must be used in this case as a replacement. For example:

(require-theme 'modus-themes)

;; All customizations here
(setq modus-themes-bold-constructs t
      modus-themes-italic-constructs t)

;; Maybe define some palette overrides, such as by using our presets
(setq modus-themes-common-palette-overrides
      modus-themes-preset-overrides-intense)

;; Load the theme of choice (built-in themes are always "safe" so they
;; do not need the `no-require' argument of `load-theme').
(load-theme 'modus-operandi)

(define-key global-map (kbd "<f5>") #'modus-themes-toggle)

3.2 Sample configuration with and without use-package

What follows is a variant of what we demonstrate in the previous section (Enable and load).

It is common for Emacs users to rely on use-package for declaring package configurations in their setup. We use this as an example:

;;; For the built-in themes which cannot use `require'.
(use-package emacs
  :config
  (require-theme 'modus-themes) ; `require-theme' is ONLY for the built-in Modus themes

  ;; Add all your customizations prior to loading the themes
  (setq modus-themes-italic-constructs t
        modus-themes-bold-constructs nil)

  ;; Maybe define some palette overrides, such as by using our presets
  (setq modus-themes-common-palette-overrides
        modus-themes-preset-overrides-intense)

  ;; Load the theme of your choice.
  (load-theme 'modus-operandi)

  (define-key global-map (kbd "<f5>") #'modus-themes-toggle))



;;; For packaged versions which must use `require'.
(use-package modus-themes
  :ensure t
  :config
  ;; Add all your customizations prior to loading the themes
  (setq modus-themes-italic-constructs t
        modus-themes-bold-constructs nil)

  ;; Maybe define some palette overrides, such as by using our presets
  (setq modus-themes-common-palette-overrides
        modus-themes-preset-overrides-intense)

  ;; Load the theme of your choice.
  (load-theme 'modus-operandi)

  (define-key global-map (kbd "<f5>") #'modus-themes-toggle))

The same without use-package:

(require 'modus-themes) ; OR for the built-in themes: (require-theme 'modus-themes)

;; Add all your customizations prior to loading the themes
(setq modus-themes-italic-constructs t
      modus-themes-bold-constructs nil)

;; Maybe define some palette overrides, such as by using our presets
(setq modus-themes-common-palette-overrides
      modus-themes-preset-overrides-intense)

;; Load the theme of your choice:
(load-theme 'modus-operandi :no-confirm)

(define-key global-map (kbd "<f5>") #'modus-themes-toggle)

Differences between loading and enabling.

Note: make sure not to customize the variable custom-theme-load-path or custom-theme-directory after the themes’ package declaration. That will lead to failures in loading the files. If either or both of those variables need to be changed, their values should be defined before the package declaration of the themes.

3.3 Differences between loading and enabling

The reason we recommend load-theme instead of the other option of enable-theme is that the former does a kind of “reset” on the face specs. It quite literally loads (or reloads) the theme. Whereas the enable-theme function simply puts an already loaded theme to the top of the list of enabled items, reusing whatever state was last loaded.

As such, load-theme reads all customizations that may happen during any given Emacs session: even after the initial setup of a theme. Examples are calls to custom-set-faces, as well as new values assigned to the options the Modus themes provide (Customization Options).

Our tests show that enable-theme does not read such variables anew, so it might appear to the unsuspecting user that the themes are somehow broken whenever they try to assign a new value to a customization option or some face.

This “reset” that load-theme brings about does, however, come at the cost of being somewhat slower than enable-theme. Users who have a stable setup and who seldom update their variables during a given Emacs session, are better off using something like this:

(require 'modus-themes)

;; Activate your desired themes here
(load-theme 'modus-operandi t t)
(load-theme 'modus-vivendi t t)

;; Enable the preferred one
(enable-theme 'modus-operandi)

Toggle themes without reloading them.

Sample configuration with and without use-package.

With the above granted, other sections of the manual discuss how to configure custom faces, where load-theme is expected, though enable-theme could still apply in stable setups:

Use theme colors in code with modus-themes-with-colors.

4.1 Option for reloading the theme on custom change

Brief: Toggle reloading of the active theme when an option is changed through the Custom UI.

Symbol: modus-themes-custom-auto-reload (‘boolean’ type)

Possible values:

1. nil
2. t (default)

All theme user options take effect when a theme is loaded. Any subsequent changes require the theme to be reloaded.

When this variable has a non-nil value, any change made via the Custom UI or related functions such as customize-set-variable and setopt (Emacs 29), will trigger a reload automatically.

With a nil value, changes to user options have no further consequences: the user must manually reload the theme (Enable and load).

4.2 Option for disabling other themes while loading Modus

Brief: Disable all other themes when loading a Modus theme.

Symbol: modus-themes-disable-other-themes (‘boolean’ type)

Possible values:

1. nil
2. t (default)

When the value is non-nil, the commands modus-themes-toggle and modus-themes-select, as well as the modus-themes-load-theme function, will disable all other themes while loading the specified Modus theme (Option for which themes to toggle). This is done to ensure that Emacs does not blend two or more themes: such blends lead to awkward results that undermine the work of the designer.

When the value is nil, the aforementioned commands and function will only disable other themes within the Modus collection.

This option is provided because Emacs themes are not necessarily limited to colors/faces: they can consist of an arbitrary set of customizations. Users who use such customization bundles must set this variable to a nil value.

4.3 Option for more bold constructs

Brief: Use bold for code syntax highlighting and related.

Symbol: modus-themes-bold-constructs (‘boolean’ type)

Possible values:

1. nil (default)
2. t

The default is to use a bold typographic weight only when it is required.

With a non-nil value (t) display several syntactic constructs in bold weight. This concerns keywords and other important aspects of code syntax. It also affects certain mode line indicators and command prompts.

Advanced users may also want to configure the exact attributes of the bold face.

Configure bold and italic faces.

4.4 Option for more italic constructs

Brief: Use italics for code syntax highlighting and related.

Symbol: modus-themes-italic-constructs (‘boolean’ type)

Possible values:

1. nil (default)
2. t

The default is to not use slanted text forms (italics) unless it is absolutely necessary.

With a non-nil value (t) choose to render more faces in italics. This typically affects documentation strings and code comments.

Advanced users may also want to configure the exact attributes of the italic face.

Configure bold and italic faces.

4.5 Option for which themes to toggle

Brief: Specify which two themes to toggle between when using the command modus-themes-toggle.

Symbol: modus-themes-to-toggle (‘list’ type)

Default value: ‘'(modus-operandi modus-vivendi)’

Possible values:

• modus-operandi
• modus-operandi-tinted
• modus-operandi-deuteranopia
• modus-operandi-tritanopia
• modus-vivendi
• modus-vivendi-tinted
• modus-vivendi-deuteranopia
• modus-vivendi-tritanopia

4.6 Option for which themes to rotate

Brief: Specify which themes to rotate among when using the command modus-themes-rotate.

Symbol: modus-themes-to-rotate (‘list’ type)

Default value: ‘modus-themes-items’ (which includes all the Modus themes)

Possible values:

• modus-operandi
• modus-operandi-tinted
• modus-operandi-deuteranopia
• modus-operandi-tritanopia
• modus-vivendi
• modus-vivendi-tinted
• modus-vivendi-deuteranopia
• modus-vivendi-tritanopia

4.7 Option for font mixing

Brief: Toggle the use of monospaced fonts for spacing-sensitive constructs (affects font families).

Symbol: modus-themes-mixed-fonts (‘boolean’ type)

Possible values:

1. nil (default)
2. t

When set to non-nil (t), configure some spacing-sensitive faces like Org tables and code blocks to always inherit from the fixed-pitch face. This is to ensure that certain constructs like code blocks and tables remain monospaced even when users opt for a mode that remaps typeface families, such as the built-in M-x variable-pitch-mode. Otherwise the layout can appear broken, due to how spacing is done.

For a consistent experience, user may need to specify the font family of the fixed-pitch face.

Font configurations for Org and others.

4.8 Option for command prompt styles

Brief: Control the style of command prompts (e.g. minibuffer, shell, IRC clients).

Symbol: modus-themes-prompts (‘choice’ type, list of properties)

Possible values are expressed as a list of properties (default is nil or an empty list). The list can include any of the following symbols:

• italic
• italic
• A font weight, which must be supported by the underlying typeface:
  • thin
  • ultralight
  • extralight
  • light
  • semilight
  • regular
  • medium
  • semibold
  • bold
  • heavy
  • extrabold
  • ultrabold

The default (a nil value or an empty list) means to only use a subtle colored foreground color.

The italic property adds a slant to the font’s forms (italic or oblique forms, depending on the typeface).

The symbol of a font weight attribute such as light, semibold, et cetera, adds the given weight to links. Valid symbols are defined in the variable modus-themes-weights. The absence of a weight means that the one of the underlying text will be used.

Combinations of any of those properties are expressed as a list, like in these examples:

(bold italic)
(italic semibold)

The order in which the properties are set is not significant.

In user configuration files the form may look like this:

(setq modus-themes-prompts '(extrabold italic))

Make prompts more or less colorful.

4.9 Option for completion framework aesthetics

Brief: Set the overall style of completion framework interfaces.

Symbol: modus-themes-completions (‘alist’ type properties)

This affects Company, Corfu, Flx, Icomplete/Fido, Ido, Ivy, Orderless, Vertico, and the standard ‘*Completions*’ buffer. The value is an alist of expressions, each of which takes the form of ‘(KEY . LIST-OF-PROPERTIES)’. ‘KEY’ is a symbol, while ‘PROPERTIES’ is a list. Here is a sample, followed by a description of the particularities:

(setq modus-themes-completions
      '((matches . (extrabold underline))
        (selection . (semibold italic))))

The matches key refers to the highlighted characters that correspond to the user’s input. When its properties are nil or an empty list, matching characters in the user interface will have a bold weight and a colored foreground. The list of properties may include any of the following symbols regardless of the order they may appear in:

• underline to draw a line below the characters;
• italic to use a slanted font (italic or oblique forms);
• The symbol of a font weight attribute such as light, semibold, et cetera. Valid symbols are defined in the variable modus-themes-weights. The absence of a weight means that bold will be used.

The selection key applies to the current line or currently matched candidate, depending on the specifics of the user interface. When its properties are nil or an empty list, it has a subtle gray background, a bold weight, and the base foreground value for the text. The list of properties it accepts is as follows (order is not significant):

• underline to draw a line below the characters;
• italic to use a slanted font (italic or oblique forms);
• The symbol of a font weight attribute such as light, semibold, et cetera. Valid symbols are defined in the variable modus-themes-weights. The absence of a weight means that bold will be used.

Apart from specifying each key separately, a catch-all list is accepted. This is only useful when the desired aesthetic is the same across all keys that are not explicitly referenced. For example, this:

(setq modus-themes-completions
      '((t . (extrabold underline))))

Is the same as:

(setq modus-themes-completions
      '((matches . (extrabold underline))
        (selection . (extrabold underline))))

Make completion matches more or less colorful.

4.10 Option for org-mode block styles

As part of version ‘4.4.0’, the modus-themes-org-blocks is no more. Users can apply palette overrides to set a style that fits their preference (purple, blue, yellow, green, etc.). It is more flexible and more powerful (DIY Make Org block colors more or less colorful)

For the option to change the background of Org source blocks, we provide the relevant setup (DIY Use colored Org source blocks per language).

4.11 Option for the headings’ overall style

Brief: Heading styles with optional list of values per heading level.

Symbol: modus-themes-headings (‘alist’ type, multiple properties)

This is an alist that accepts a ‘(KEY . LIST-OF-VALUES)’ combination. The ‘KEY’ is either a number, representing the heading’s level (0 through 8) or t, which pertains to the fallback style. The named keys ‘agenda-date’ and ‘agenda-structure’ apply to the Org agenda.

Level 0 is a special heading: it is used for what counts as a document title or equivalent, such as the ‘#+title’ construct we find in Org files. Levels 1-8 are regular headings.

The ‘LIST-OF-VALUES’ covers symbols that refer to properties, as described below. Here is a complete sample with various stylistic combinations, followed by a presentation of all available properties:

(setq modus-themes-headings
      '((1 . (variable-pitch 1.5))
        (2 . (1.3))
        (agenda-date . (1.3))
        (agenda-structure . (variable-pitch light 1.8))
        (t . (1.1))))

Properties:

• A font weight, which must be supported by the underlying typeface:
  • thin
  • ultralight
  • extralight
  • light
  • semilight
  • regular
  • medium
  • semibold
  • bold (default)
  • heavy
  • extrabold
  • ultrabold
• A floating point as a height multiple of the default or a cons cell in the form of ‘(height . FLOAT)’.

By default (a nil value for this variable), all headings have a bold typographic weight and use a desaturated text color.

A variable-pitch property changes the font family of the heading to that of the variable-pitch face (normally a proportionately spaced typeface).

The symbol of a weight attribute adjusts the font of the heading accordingly, such as light, semibold, etc. Valid symbols are defined in the variable modus-themes-weights. The absence of a weight means that bold will be used by virtue of inheriting the bold face.

Configure bold and italic faces.

A number, expressed as a floating point (e.g. 1.5), adjusts the height of the heading to that many times the base font size. The default height is the same as 1.0, though it need not be explicitly stated. Instead of a floating point, an acceptable value can be in the form of a cons cell like ‘(height . FLOAT)’ or ‘(height FLOAT)’, where FLOAT is the given number.

Combinations of any of those properties are expressed as a list, like in these examples:

(semibold)
(variable-pitch semibold 1.3)
(variable-pitch semibold (height 1.3)) ; same as above
(variable-pitch semibold (height . 1.3)) ; same as above

The order in which the properties are set is not significant.

In user configuration files the form may look like this:

(setq modus-themes-headings
      '((1 . (variable-pitch 1.5))
        (2 . (1.3))
        (agenda-date . (1.3))
        (agenda-structure . (variable-pitch light 1.8))
        (t . (1.1))))

When defining the styles per heading level, it is possible to pass a non-nil value (t) instead of a list of properties. This will retain the original aesthetic for that level. For example:

(setq modus-themes-headings
      '((1 . t)           ; keep the default style
        (2 . (semibold 1.2))
        (t . (rainbow)))) ; style for all other headings

(setq modus-themes-headings
      '((1 . (variable-pitch 1.5))
        (2 . (semibold))
        (t . t))) ; default style for all other levels

Note that the text color of headings, of their background, and overline can all be set via the overrides. It is possible to have any color combination for any heading level (something that could not be done in older versions of the themes).

Option for palette overrides.

Make headings more or less colorful.

4.12 Option for variable-pitch font in UI elements

Brief: Toggle the use of proportionately spaced (variable-pitch) fonts in the User Interface.

Symbol: modus-themes-variable-pitch-ui (‘boolean’ type)

Possible values:

1. nil (default)
2. t

This option concerns User Interface elements that are under the direct control of Emacs. In particular: the mode line, header line, tab bar, and tab line.

The default is to use the same font as the rest of Emacs, which usually is a monospaced family.

With a non-nil value (t) apply a proportionately spaced typeface. This is done by assigning the variable-pitch face to the relevant items.

Font configurations for Org and others.

4.13 Option for palette overrides

This section describes palette overrides in detail. For a simpler alternative, use the presets we provide (Palette override presets).

Each Modus theme specifies a color palette that declares named color values and semantic color mappings:

• Named colors consist of a symbol and a string that specifies a hexadecimal RGB value. For example: ‘(blue-warmer "#354fcf")’.
• The semantic color mappings associate an abstract construct with a given named color from the palette, like ‘(heading-2 yellow-faint)’. Both elements of the list are symbols, though the cadr (value) can be a string that specifies a color, such as ‘(heading-2 "#354fcf")’.

Both of those subsets can be overridden, thus refashioning the theme. Overrides are either shared, by being stored in the user option modus-themes-common-palette-overrides, or they are specific to the theme they name. In the latter case, the naming scheme of each palette variable is ‘THEME-NAME-palette-overrides’, thus yielding:

• modus-operandi-palette-overrides

• modus-operandi-deuteranopia-palette-overrides

• modus-operandi-tinted-palette-overrides

• modus-operandi-tritanopia-palette-overrides

• modus-vivendi-palette-overrides

• modus-vivendi-deuteranopia-palette-overrides

• modus-vivendi-tinted-palette-overrides

• modus-vivendi-tritanopia-palette-overrides

Theme-specific overrides take precedence over the shared ones. It is strongly advised that shared overrides do NOT alter color values, as those will not be appropriate for both dark and light themes. Common overrides are best limited to the semantic color mappings as those use the color value that corresponds to the active theme (e.g. make the cursor ‘blue-warmer’ in all themes, whatever the value of ‘blue-warmer’ is in each theme).

The value of any overrides’ variable must mirror a theme’s palette. Palette variables are named after their theme as ‘THEME-NAME-palette’. For example, the modus-operandi-palette is like this:

(defconst modus-operandi-palette
    '(
;;; Basic values

      (bg-main     "#ffffff")
      (bg-dim      "#f0f0f0")
      (fg-main     "#000000")

      ;; ...

      (red         "#a60000")
      (red-warmer  "#972500")
      (red-cooler  "#a0132f")
      (red-faint   "#7f0000")
      (red-intense "#d00000")

      ;; ...

;;;; Mappings

      ;; ...

      (cursor fg-main)
      (builtin magenta-warmer)
      (comment fg-dim)
      (constant blue-cooler)
      (docstring green-faint)
      (fnname magenta)
      (keyword magenta-cooler)

      ;; ...
      ))

The modus-operandi-palette-overrides targets the entries that need to be changed. For example, to make the main foreground color a dark gray instead of pure black, use a shade of red for comments, and apply a cyan hue to keywords:

(setq modus-operandi-palette-overrides
      '((fg-main "#333333")
        (comment red-faint)
        (keyword cyan-cooler)))

Changes take effect upon theme reload (Option for reloading the theme on custom change). Overrides are removed by setting their variable to a nil value.

The common accented foregrounds in each palette follow a predictable naming scheme: ‘HUE{,-warmer,-cooler,-faint,-intense}’. ‘HUE’ is one of the six basic colors: red, green, blue, yellow, magenta, cyan.

Named colors that are meant to be used as backgrounds contain ‘bg’ in their name, such as ‘bg-red-intense’. While special purpose foregrounds that are meant to be combined with such backgrounds, contain ‘fg’ in their name, such as ‘fg-removed’ which complements ‘bg-removed’.

Named colors can be previewed, such as with the command modus-themes-list-colors (Preview theme colors).

For a video tutorial that users of all skill levels can approach, watch: https://protesilaos.com/codelog/2022-12-17-modus-themes-v4-demo/.

4.14 Option to extend the palette

It is possible to extend the palette of each theme. For example, the user may define their own ‘cherry’ color with a value of ‘#a0134f’ and then apply it as an override (Option for palette overrides). Those colors may also be used in custom code that leverages either the modus-themes-with-colors macro or the function modus-themes-get-color-value.

The palette extension can be done in the form of a common set of definitions that are shared among the themes or on a per-theme basis.

The common values are stored in the user option modus-themes-common-palette-user. As for per-theme variables, we have the following user options:

• modus-operandi-palette-user

• modus-operandi-tinted-palette-user

• modus-operandi-deuteranopia-palette-user

• modus-operandi-tritanopia-palette-user

• modus-vivendi-palette-user

• modus-vivendi-tinted-palette-user

• modus-vivendi-deuteranopia-palette-user

• modus-vivendi-tritanopia-palette-user

Examples demonstrating how to use the aforementioned:

;;; Common customizations

;; Define two new colors in the common "user" palette of all the Modus themes.
(setq modus-themes-common-palette-user
      '((cherry "#a0134f")
        (plum "#6f459a")))

;; Use them in the overrides.
(setq modus-themes-common-palette-overrides
      '((cursor cherry)
        (string plum)))

;;; Per-theme customizations

;; Define two new colors in the "user" palette of `modus-operandi'.
;; Other themes will not use these.
(setq modus-operandi-palette-user
      '((cherry "#a0134f")
        (plum "#6f459a")))

;; Use them in the overrides.
(setq modus-operandi-palette-overrides
      '((cursor cherry)
        (string plum)))


;; Tweaks on a per-theme basis give the user maximum flexibility. For
;; example, they can have the above for `modus-operandi' while they use
;; these for `modus-vivendi':
(setq modus-vivendi-palette-user
      '((apricot "#dfb350")
        (kiwi "#80d458")))

(setq modus-vivendi-palette-overrides
      '((cursor apricot)
        (string kiwi)))

6.1 Get a single color from the palette with modus-themes-get-color-value

The fuction modus-themes-get-color-value can be called from Lisp to return the value of a color from the active Modus theme palette. It takea a ‘COLOR’ argument and an optional ‘OVERRIDES’. It also accepts a third ‘THEME’ argument, to get the color from the given theme.

‘COLOR’ is a symbol that represents a named color entry in the palette (Preview theme colors).

If the value is the name of another color entry in the palette (so a mapping), this function recurs until it finds the underlying color value.

With an optional ‘OVERRIDES’ argument as a non-nil value, it accounts for palette overrides. Else it reads only the default palette (Option for palette overrides)

With an optional ‘THEME’ as a symbol among the modus-themes-items (alias modus-themes-collection), it uses the palette of that theme. Else it uses the current Modus theme.

If ‘COLOR’ is not present in the palette, this function returns the unspecified symbol, which is safe when used as a face attribute’s value.

An example with modus-operandi to show how this function behaves with/without overrides and when recursive mappings are introduced.

;; Here we show the recursion of palette mappings.  In general, it is
;; better for the user to specify named colors to avoid possible
;; confusion with their configuration, though those still work as
;; expected.
(setq modus-themes-common-palette-overrides
      '((cursor red)
        (fg-mode-line-active cursor)
        (border-mode-line-active fg-mode-line-active)))

;; Ignore the overrides and get the original value.
(modus-themes-get-color-value 'border-mode-line-active)
;; => "#5a5a5a"

;; Read from the overrides and deal with any recursion to find the
;; underlying value.
(modus-themes-get-color-value 'border-mode-line-active :overrides)
;; => "#a60000"

6.2 Use theme colors in code with modus-themes-with-colors

[ Note that for common cases the following is not not needed. Just rely on the comprehensive overrides we provide (Option for palette overrides). ]

Advanced users may want to apply many colors from the palette of the active Modus theme in their custom code. In such a case, retrieving each value with the function modus-themes-get-color-value is inefficient (Get a single color from the palette). The Lisp macro modus-themes-with-colors provides the requisite functionality. It supplies the current theme’s palette to the code called from inside of it. For example:

(modus-themes-with-colors
  (list blue-warmer magenta-cooler fg-added warning variable fg-heading-4))
;; => ("#354fcf" "#531ab6" "#005000" "#884900" "#005e8b" "#721045")

The above return value is for modus-operandi when that is the active theme. Switching to another theme and evaluating this code anew will return the relevant results for that theme (remember that since version 4, the Modus themes consist of many items (Overview)). The same with modus-vivendi as the active theme:

(modus-themes-with-colors
  (list blue-warmer magenta-cooler fg-added warning variable fg-heading-4))
;; => ("#79a8ff" "#b6a0ff" "#a0e0a0" "#fec43f" "#00d3d0" "#feacd0")

The modus-themes-with-colors has access to the whole palette of the active theme, meaning that it can instantiate both (i) named colors like ‘blue-warmer’ and (ii) semantic color mappings like ‘warning’. We provide commands to inspect those (Preview theme colors).

Others sections in this manual show how to use the aforementioned macro (Advanced customization). In practice, the use of a hook will also be needed (DIY Use a hook at the post-load-theme phase).

7.1 DIY Palette override presets

This section shows how to refashion the themes by opting in to the stylistic presets we provide. Those presets override the default color mappings to amplify, tone down, or refashion the overall coloration of the themes.

To make almost all aspects of the themes less intense, use this:

;; Always remember to reload the theme for changes to take effect!
(setq modus-themes-common-palette-overrides modus-themes-preset-overrides-faint)

With modus-themes-preset-overrides-faint the grays are toned down, gray backgrounds are removed from some contexts, and almost all accent colors are desaturated. It makes the themes less attention-grabbing.

On the opposite end of the stylistic spectrum, we have this

;; Always remember to reload the theme for changes to take effect!
(setq modus-themes-common-palette-overrides modus-themes-preset-overrides-intense)

The modus-themes-preset-overrides-intense makes many background colors accented instead of gray and increases coloration in a number of places. Colors stand out more and are made easier to spot.

For some stylistic variation try the “cooler” and “warmer” presets:

;; This:
(setq modus-themes-common-palette-overrides modus-themes-preset-overrides-cooler)

;; Or:
(setq modus-themes-common-palette-overrides modus-themes-preset-overrides-warmer)

Note that the user is not limited to those presets. The system of overrides we provide makes it possible to tweak the value of each individual named color and to change how values are assigned to semantic color mappings (Option for palette overrides). Subsequent sections provide examples (Stylistic variants using palette overrides).

It is also possible to use those presets as a basis and, for example, add to them code from the subsequent sections of this manual. This is the general idea (extra space for didactic purposes):

(setq modus-themes-common-palette-overrides
      `(
        ;; From the section "Make the mode line borderless"
        (border-mode-line-active unspecified)
        (border-mode-line-inactive unspecified)

        ;; From the section "Make matching parenthesis more or less intense"
        (bg-paren-match bg-magenta-intense)
        (underline-paren-match fg-main)

        ;; And expand the preset here.  Note that the ,@ works because
        ;; we use the backtick for this list, instead of a straight
        ;; quote.
        ,@modus-themes-preset-overrides-intense))

7.2 DIY Add support for engrave-faces

The engraved-faces package is used as part of an Org export process to produce decent colors in the output. Its default style though requires changes to use the colors of the active Modus theme.

In the code below we show how to map everything that engrave-faces defines to the corresponding entry in the palette of the active Modus theme. We then use a hook to ensure that the value is updated after we switch to another theme in the collection (DIY Use a hook at the post-load-theme phase).

(defun my-modus-themes-engraved-faces (&rest _)
  (modus-themes-with-colors
    (setq engrave-faces-themes
          `((default .
                     (;; faces.el --- excluding: bold, italic, bold-italic, underline, and some others
                      (default                             :short "default"             :slug "D"   :foreground ,fg-main :background ,bg-main :family "Monospace")
                      (variable-pitch                      :short "var-pitch"           :slug "vp"  :foreground ,fg-main                       :family "Sans Serif")
                      (shadow                              :short "shadow"              :slug "h"   :foreground ,fg-dim)
                      (success                             :short "success"             :slug "sc"  :foreground ,green :weight bold)
                      (warning                             :short "warning"             :slug "w"   :foreground ,warning :weight bold)
                      (error                               :short "error"               :slug "e"   :foreground ,err :weight bold)
                      (link                                :short "link"                :slug "l"   :foreground ,fg-link)
                      (link-visited                        :short "link"                :slug "lv"  :foreground ,fg-link-visited)
                      (highlight                           :short "link"                :slug "hi"  :foreground ,info)
                      ;; font-lock.el
                      (font-lock-comment-face              :short "fl-comment"          :slug "c"   :foreground ,comment)
                      (font-lock-comment-delimiter-face    :short "fl-comment-delim"    :slug "cd"  :foreground ,comment)
                      (font-lock-string-face               :short "fl-string"           :slug "s"   :foreground ,string)
                      (font-lock-doc-face                  :short "fl-doc"              :slug "d"   :foreground ,docstring)
                      (font-lock-doc-markup-face           :short "fl-doc-markup"       :slug "m"   :foreground ,docmarkup)
                      (font-lock-keyword-face              :short "fl-keyword"          :slug "k"   :foreground ,keyword)
                      (font-lock-builtin-face              :short "fl-builtin"          :slug "b"   :foreground ,builtin)
                      (font-lock-function-name-face        :short "fl-function"         :slug "f"   :foreground ,fnname)
                      (font-lock-variable-name-face        :short "fl-variable"         :slug "v"   :foreground ,variable)
                      (font-lock-type-face                 :short "fl-type"             :slug "t"   :foreground ,type)
                      (font-lock-constant-face             :short "fl-constant"         :slug "o"   :foreground ,constant)
                      (font-lock-warning-face              :short "fl-warning"          :slug "wr"  :foreground ,warning :weight bold)
                      (font-lock-negation-char-face        :short "fl-neg-char"         :slug "nc")
                      (font-lock-preprocessor-face         :short "fl-preprocessor"     :slug "pp"  :foreground ,preprocessor)
                      (font-lock-regexp-grouping-construct :short "fl-regexp"           :slug "rc"                        :weight bold)
                      (font-lock-regexp-grouping-backslash :short "fl-regexp-backslash" :slug "rb"                        :weight bold)
                      ;; org-faces.el
                      (org-block                           :short "org-block"           :slug "ob") ; forcing no background is preferable
                      (org-block-begin-line                :short "org-block-begin"     :slug "obb") ; forcing no background is preferable
                      (org-block-end-line                  :short "org-block-end"       :slug "obe") ; forcing no background is preferable
                      ;; outlines
                      (outline-1                           :short "outline-1"           :slug "Oa"  :foreground ,fg-heading-1)
                      (outline-2                           :short "outline-2"           :slug "Ob"  :foreground ,fg-heading-2)
                      (outline-3                           :short "outline-3"           :slug "Oc"  :foreground ,fg-heading-3)
                      (outline-4                           :short "outline-4"           :slug "Od"  :foreground ,fg-heading-4)
                      (outline-5                           :short "outline-5"           :slug "Oe"  :foreground ,fg-heading-5)
                      (outline-6                           :short "outline-6"           :slug "Of"  :foreground ,fg-heading-6)
                      (outline-7                           :short "outline-7"           :slug "Og"  :foreground ,fg-heading-7)
                      (outline-8                           :short "outline-8"           :slug "Oh"  :foreground ,fg-heading-8)
                      ;; highlight-numbers.el
                      (highlight-numbers-number            :short "hl-number"           :slug "hn"  :foreground ,number)
                      ;; highlight-quoted.el
                      (highlight-quoted-quote              :short "hl-qquote"           :slug "hq"  :foreground ,string)
                      (highlight-quoted-symbol             :short "hl-qsymbol"          :slug "hs"  :foreground ,constant)
                      ;; rainbow-delimiters.el
                      (rainbow-delimiters-depth-1-face     :short "rd-1"                :slug "rda" :foreground ,rainbow-0)
                      (rainbow-delimiters-depth-2-face     :short "rd-2"                :slug "rdb" :foreground ,rainbow-1)
                      (rainbow-delimiters-depth-3-face     :short "rd-3"                :slug "rdc" :foreground ,rainbow-2)
                      (rainbow-delimiters-depth-4-face     :short "rd-4"                :slug "rdd" :foreground ,rainbow-3)
                      (rainbow-delimiters-depth-5-face     :short "rd-5"                :slug "rde" :foreground ,rainbow-4)
                      (rainbow-delimiters-depth-6-face     :short "rd-6"                :slug "rdf" :foreground ,rainbow-5)
                      (rainbow-delimiters-depth-7-face     :short "rd-7"                :slug "rdg" :foreground ,rainbow-6)
                      (rainbow-delimiters-depth-8-face     :short "rd-8"                :slug "rdh" :foreground ,rainbow-7)
                      (rainbow-delimiters-depth-9-face     :short "rd-9"                :slug "rdi" :foreground ,rainbow-8)
                      ;; ansi-color
                      (ansi-color-yellow                   :short "ansi-yellow"         :slug "any" :foreground ,fg-term-yellow)
                      (ansi-color-red                      :short "ansi-red"            :slug "anr" :foreground ,fg-term-red)
                      (ansi-color-black                    :short "ansi-black"          :slug "anb" :foreground ,fg-term-black)
                      (ansi-color-green                    :short "ansi-green"          :slug "ang" :foreground ,fg-term-green)
                      (ansi-color-blue                     :short "ansi-blue"           :slug "anB" :foreground ,fg-term-blue)
                      (ansi-color-cyan                     :short "ansi-cyan"           :slug "anc" :foreground ,fg-term-cyan)
                      (ansi-color-white                    :short "ansi-white"          :slug "anw" :foreground ,fg-term-white)
                      (ansi-color-magenta                  :short "ansi-magenta"        :slug "anm" :foreground ,fg-term-magenta)
                      (ansi-color-bright-yellow            :short "ansi-bright-yellow"  :slug "ANy" :foreground ,fg-term-yellow-bright)
                      (ansi-color-bright-red               :short "ansi-bright-red"     :slug "ANr" :foreground ,fg-term-red-bright)
                      (ansi-color-bright-black             :short "ansi-bright-black"   :slug "ANb" :foregroun  ,fg-term-black-bright)
                      (ansi-color-bright-green             :short "ansi-bright-green"   :slug "ANg" :foreground ,fg-term-green-bright)
                      (ansi-color-bright-blue              :short "ansi-bright-blue"    :slug "ANB" :foreground ,fg-term-blue-bright)
                      (ansi-color-bright-cyan              :short "ansi-bright-cyan"    :slug "ANc" :foreground ,fg-term-cyan-bright)
                      (ansi-color-bright-white             :short "ansi-bright-white"   :slug "ANw" :foregroun  ,fg-term-white-bright)
                      (ansi-color-bright-magenta           :short "ansi-bright-magenta" :slug "ANm" :foregroun  ,fg-term-magenta-bright)))))))

(add-hook 'enable-theme-functions #'my-modus-themes-engraved-faces)

7.3 DIY Stylistic variants using palette overrides

This section contains practical examples of overriding the palette of the themes (Option for palette overrides). Users can copy the code to their init file, evaluate it, and then re-load the theme for changes to take effect. To apply overrides at startup simply define them before the call that loads the theme. Remember that we also provide presets that are easier to apply (Palette override presets).

• DIY Make the mode line borderless
• DIY Make the active mode line colorful
• DIY Make the tab bar more or less colorful
• DIY Make the fringe invisible or another color
• DIY Make links use subtle or no underlines
• DIY Make prompts more or less colorful
• DIY Make completion matches more or less colorful
• DIY Make comments yellow and strings green
• DIY Make code syntax use the old alt-syntax style
• DIY Make use of alternative styles for code syntax
• DIY Make matching parenthesis more or less intense
• DIY Make box buttons more or less gray
• DIY Make TODO and DONE more or less intense
• DIY Make headings more or less colorful
• DIY Make Org block colors more or less colorful
• DIY Make Org agenda more or less colorful
• DIY Make inline code in prose use alternative styles
• DIY Make mail citations and headers more or less colorful
• DIY Make the region preserve text colors, plus other styles
• DIY Make mouse highlights more or less colorful
• DIY Make language underlines less colorful
• DIY Make line numbers use alternative styles
• DIY Make diffs use only a foreground
• DIY Make deuteranopia diffs red and blue instead of yellow and blue

;; Remove the border
(setq modus-themes-common-palette-overrides
      '((border-mode-line-active unspecified)
        (border-mode-line-inactive unspecified)))

;; Keep the border but make it the same color as the background of the
;; mode line (thus appearing borderless).  The difference with the
;; above is that this version is a bit thicker because the border are
;; still there.
(setq modus-themes-common-palette-overrides
      '((border-mode-line-active bg-mode-line-active)
        (border-mode-line-inactive bg-mode-line-inactive)))

;; Blue background, neutral foreground, intense blue border
(setq modus-themes-common-palette-overrides
      '((bg-mode-line-active bg-blue-intense)
        (fg-mode-line-active fg-main)
        (border-mode-line-active blue-intense)))

;; Subtle blue background, neutral foreground, intense blue border
(setq modus-themes-common-palette-overrides
      '((bg-mode-line-active bg-blue-subtle)
        (fg-mode-line-active fg-main)
        (border-mode-line-active blue-intense)))

;; Sage (green/cyan) background, neutral foreground, slightly distinct green border
(setq modus-themes-common-palette-overrides
      '((bg-mode-line-active bg-sage)
        (fg-mode-line-active fg-main)
        (border-mode-line-active bg-green-intense)))

;; As above, but with a purple style
(setq modus-themes-common-palette-overrides
      '((bg-mode-line-active bg-lavender)
        (fg-mode-line-active fg-main)
        (border-mode-line-active bg-magenta-intense)))

;; As above, but with an earthly style
(setq modus-themes-common-palette-overrides
      '((bg-mode-line-active bg-ochre)
        (fg-mode-line-active fg-main)
        (border-mode-line-active bg-yellow-intense)))

;; Make the `tab-bar-mode' mode subtle while keepings its original
;; gray aesthetic.
(setq modus-themes-common-palette-overrides
      '((bg-tab-bar bg-main)
        (bg-tab-current bg-active)
        (bg-tab-other bg-dim)))

;; Like the above, but the current tab has a colorful background and
;; the inactive tabs have a slightly more noticeable gray background.
(setq modus-themes-common-palette-overrides
      '((bg-tab-bar bg-main)
        (bg-tab-current bg-cyan-intense)
        (bg-tab-other bg-inactive)))

;; Make the tabs colorful, using a monochromatic pattern (e.g. shades
;; of cyan).
(setq modus-themes-common-palette-overrides
      '((bg-tab-bar bg-cyan-nuanced)
        (bg-tab-current bg-cyan-intense)
        (bg-tab-other bg-cyan-subtle)))

;; Like the above, but with a dichromatic pattern (cyan and magenta).
(setq modus-themes-common-palette-overrides
      '((bg-tab-bar bg-cyan-nuanced)
        (bg-tab-current bg-magenta-intense)
        (bg-tab-other bg-cyan-subtle)))

;; Make the fringe invisible
(setq modus-themes-common-palette-overrides
      '((fringe unspecified)))

;; Make the fringe more intense
(setq modus-themes-common-palette-overrides
      '((fringe bg-active)))

;; Make the fringe colorful, but nuanced
(setq modus-themes-common-palette-overrides
      '((fringe bg-blue-nuanced)))

;; Subtle underlines
(setq modus-themes-common-palette-overrides
      '((underline-link border)
        (underline-link-visited border)
        (underline-link-symbolic border)))

;; No underlines
(setq modus-themes-common-palette-overrides
      '((underline-link unspecified)
        (underline-link-visited unspecified)
        (underline-link-symbolic unspecified)))

;; Keep the background unspecified (like the default), but use a faint
;; foreground color.
(setq modus-themes-common-palette-overrides
      '((fg-prompt cyan-faint)
        (bg-prompt unspecified)))

;; Add a nuanced background to prompts that complements their foreground.
(setq modus-themes-common-palette-overrides
      '((fg-prompt cyan)
        (bg-prompt bg-cyan-nuanced)))

;; Add a yellow background and adjust the foreground accordingly.
(setq modus-themes-common-palette-overrides
      '((fg-prompt fg-main)
        (bg-prompt bg-yellow-subtle))) ; try to replace "subtle" with "intense"

;; Add a nuanced background color to completion matches, while keeping
;; their foreground intact (foregrounds do not need to be specified in
;; this case, but we do it for didactic purposes).
(setq modus-themes-common-palette-overrides
      '((fg-completion-match-0 blue)
        (fg-completion-match-1 magenta-warmer)
        (fg-completion-match-2 cyan)
        (fg-completion-match-3 red)
        (bg-completion-match-0 bg-blue-nuanced)
        (bg-completion-match-1 bg-magenta-nuanced)
        (bg-completion-match-2 bg-cyan-nuanced)
        (bg-completion-match-3 bg-red-nuanced)))

;; Add intense background colors to completion matches and adjust the
;; foregrounds accordingly.
(setq modus-themes-common-palette-overrides
      '((fg-completion-match-0 fg-main)
        (fg-completion-match-1 fg-main)
        (fg-completion-match-2 fg-main)
        (fg-completion-match-3 fg-main)
        (bg-completion-match-0 bg-blue-intense)
        (bg-completion-match-1 bg-yellow-intense)
        (bg-completion-match-2 bg-cyan-intense)
        (bg-completion-match-3 bg-red-intense)))

;; Like the above, but with subtle backgrounds.
(setq modus-themes-common-palette-overrides
      '((fg-completion-match-0 fg-main)
        (fg-completion-match-1 fg-main)
        (fg-completion-match-2 fg-main)
        (fg-completion-match-3 fg-main)
        (bg-completion-match-0 bg-blue-subtle)
        (bg-completion-match-1 bg-yellow-subtle)
        (bg-completion-match-2 bg-cyan-subtle)
        (bg-completion-match-3 bg-red-subtle)))

;; No backgrounds (like the default) and just use two colors.
(setq modus-themes-common-palette-overrides
      '((fg-completion-match-0 blue)
        (fg-completion-match-1 yellow)
        (fg-completion-match-2 blue)
        (fg-completion-match-3 yellow)
        (bg-completion-match-0 unspecified)
        (bg-completion-match-1 unspecified)
        (bg-completion-match-2 unspecified)
        (bg-completion-match-3 unspecified)))

;; Again, a two-color style but this time with backgrounds
(setq modus-themes-common-palette-overrides
      '((fg-completion-match-0 blue)
        (fg-completion-match-1 yellow)
        (fg-completion-match-2 blue)
        (fg-completion-match-3 yellow)
        (bg-completion-match-0 bg-blue-nuanced)
        (bg-completion-match-1 bg-yellow-nuanced)
        (bg-completion-match-2 bg-blue-nuanced)
        (bg-completion-match-3 bg-yellow-nuanced)))

;; Yellow comments and green strings like older versions of the Modus
;; themes
(setq modus-themes-common-palette-overrides
      '((comment yellow-cooler)
        (string green-cooler)))

;; Faint yellow comments and a different shade of green for strings
(setq modus-themes-common-palette-overrides
      '((comment yellow-faint)
        (string green-warmer)))

;; Green comments and yellow strings, because now the user has the
;; freedom to do it
(setq modus-themes-common-palette-overrides
      '((comment green)
        (string yellow-cooler)))

;; The old "alt-syntax" (before version 4.0.0 of the Modus themes)
(setq modus-themes-common-palette-overrides
      '((builtin magenta)
        (comment fg-dim)
        (constant magenta-cooler)
        (docstring magenta-faint)
        (docmarkup green-faint)
        (fnname magenta-warmer)
        (keyword cyan)
        (preprocessor cyan-cooler)
        (string red-cooler)
        (type magenta-cooler)
        (variable blue-warmer)
        (rx-construct magenta-warmer)
        (rx-backslash blue-cooler)))

;; Same as above, but with yellow comments and green strings
(setq modus-themes-common-palette-overrides
      '((builtin magenta)
        (comment yellow-faint)
        (constant magenta-cooler)
        (docstring green-faint)
        (docmarkup magenta-faint)
        (fnname magenta-warmer)
        (keyword cyan)
        (preprocessor cyan-cooler)
        (string green-cooler)
        (type magenta-cooler)
        (variable blue-warmer)
        (rx-construct magenta-warmer)
        (rx-backslash blue-cooler)))

;; Like the old "alt-syntax" but with faint red comments
(setq modus-themes-common-palette-overrides
      '((builtin magenta)
        (comment red-faint)
        (constant magenta-cooler)
        (docstring magenta-faint)
        (docmarkup green-faint)
        (fnname magenta-warmer)
        (keyword cyan)
        (preprocessor cyan-cooler)
        (string red-cooler)
        (type magenta-cooler)
        (variable blue-warmer)
        (rx-construct magenta-warmer)
        (rx-backslash blue-cooler)))

;; Mimic `ef-night' theme (from my `ef-themes') for code syntax
;; highlighting, while still using the Modus colors (and other
;; mappings).
(setq modus-themes-common-palette-overrides
      '((builtin green-cooler)
        (comment yellow-faint)
        (constant magenta-cooler)
        (fnname cyan-cooler)
        (keyword blue-warmer)
        (preprocessor red-warmer)
        (docstring cyan-faint)
        (string blue-cooler)
        (type magenta-cooler)
        (variable cyan)))

;; Mimic `ef-summer' theme (from my `ef-themes') for code syntax
;; highlighting, while still using the Modus colors (and other
;; mappings).
(setq modus-themes-common-palette-overrides
      '((builtin magenta)
        (comment yellow-faint)
        (constant red-cooler)
        (fnname magenta-warmer)
        (keyword magenta-cooler)
        (preprocessor green-warmer)
        (docstring cyan-faint)
        (string yellow-warmer)
        (type cyan-warmer)
        (variable blue-warmer)))

;; Mimic `ef-bio' theme (from my `ef-themes') for code syntax
;; highlighting, while still using the Modus colors (and other
;; mappings).
(setq modus-themes-common-palette-overrides
      '((builtin green)
        (comment yellow-faint)
        (constant blue)
        (fnname green-warmer)
        (keyword green-cooler)
        (preprocessor green)
        (docstring green-faint)
        (string magenta-cooler)
        (type cyan-warmer)
        (variable blue-warmer)))

;; Mimic `ef-trio-light' theme (from my `ef-themes') for code syntax
;; highlighting, while still using the Modus colors (and other
;; mappings).
(setq modus-themes-common-palette-overrides
      '((builtin magenta-cooler)
        (comment yellow-faint)
        (constant magenta-warmer)
        (fnname blue-warmer)
        (keyword magenta)
        (preprocessor red-cooler)
        (docstring magenta-faint)
        (string green-cooler)
        (type cyan-cooler)
        (variable cyan-warmer)))

;; Change the background to a shade of magenta
(setq modus-themes-common-palette-overrides
      '((bg-paren-match bg-magenta-intense)))

;; Enable underlines by applying a color to them
(setq modus-themes-common-palette-overrides
      '((bg-paren-match bg-magenta-intense)
        (underline-paren-match fg-main)))

;; Do not use any background color and instead apply an intense red
;; foreground.
(setq modus-themes-common-palette-overrides
      '((bg-paren-match unspecified)
        (fg-paren-match red-intense)))

(setq modus-themes-common-palette-overrides
      '((bg-button-active bg-main)
        (fg-button-active fg-main)
        (bg-button-inactive bg-inactive)
        (fg-button-inactive "gray50")))

;; Increase intensity
(setq modus-themes-common-palette-overrides
      '((prose-done green-intense)
        (prose-todo red-intense)))

;; Tone down intensity
(setq modus-themes-common-palette-overrides
      '((prose-done green-faint)   ; OR replace `green-faint' with `olive'
        (prose-todo red-faint)))   ; OR replace `red-faint' with `rust'

;; Keep TODO at its default (so no override for it), but make DONE
;; gray.
(setq modus-themes-common-palette-overrides
      '((prose-done fg-dim)))

;; Apply more colorful foreground to some headings (headings 0-8).
;; Level 0 is for Org #+title and related.
(setq modus-themes-common-palette-overrides
      '((fg-heading-1 blue-warmer)
        (fg-heading-2 yellow-cooler)
        (fg-heading-3 cyan-cooler)))

;; Like the above, but with gradient colors
(setq modus-themes-common-palette-overrides
      '((fg-heading-1 blue)
        (fg-heading-2 cyan)
        (fg-heading-3 green)))

;; Add color to level 1 heading, but use the main foreground for
;; others
(setq modus-themes-common-palette-overrides
      '((fg-heading-1 blue)
        (fg-heading-2 fg-main)
        (fg-heading-3 fg-main)))

;; Apply colorful foreground, background, and overline (headings 0-8)
(setq modus-themes-common-palette-overrides
      '((fg-heading-1 blue-warmer)
        (bg-heading-1 bg-blue-nuanced)
        (overline-heading-1 blue)))

;; Apply gray scale foreground, background, and overline (headings 0-8)
(setq modus-themes-common-palette-overrides
      '((fg-heading-1 fg-main)
        (bg-heading-1 bg-dim)
        (overline-heading-1 border)))

;; Make code blocks (in Org, for example) use a more colorful style
;; for their delimiter lines as well as their contents.  Give this a
;; purple feel.  Make the delimiter lines distinct from the contents.
(setq modus-themes-common-palette-overrides
      '((bg-prose-block-contents bg-magenta-nuanced)
        (bg-prose-block-delimiter bg-lavender)
        (fg-prose-block-delimiter fg-main)))

;; As above, but with a more blue feel.
(setq modus-themes-common-palette-overrides
      '((bg-prose-block-contents bg-blue-nuanced)
        (bg-prose-block-delimiter bg-lavender)
        (fg-prose-block-delimiter fg-main)))

;; As above, but with a green feel.
(setq modus-themes-common-palette-overrides
      '((bg-prose-block-contents bg-green-nuanced)
        (bg-prose-block-delimiter bg-sage)
        (fg-prose-block-delimiter fg-main)))

;; As above, but with a yellow/gold feel.
(setq modus-themes-common-palette-overrides
      '((bg-prose-block-contents bg-yellow-nuanced)
        (bg-prose-block-delimiter bg-ochre)
        (fg-prose-block-delimiter fg-main)))

;; As above, but with a slightly more red feel.
(setq modus-themes-common-palette-overrides
      '((bg-prose-block-contents bg-red-nuanced)
        (bg-prose-block-delimiter bg-ochre)
        (fg-prose-block-delimiter fg-main)))

;; Solid green style.
(setq modus-themes-common-palette-overrides
      '((bg-prose-block-contents bg-green-nuanced)
        (bg-prose-block-delimiter bg-green-nuanced)
        (fg-prose-block-delimiter green-warmer)))

;; Solid yellow style.
(setq modus-themes-common-palette-overrides
      '((bg-prose-block-contents bg-yellow-nuanced)
        (bg-prose-block-delimiter bg-yellow-nuanced)
        (fg-prose-block-delimiter yellow-cooler)))

;; Solid cyan style.
(setq modus-themes-common-palette-overrides
      '((bg-prose-block-contents bg-cyan-nuanced)
        (bg-prose-block-delimiter bg-cyan-nuanced)
        (fg-prose-block-delimiter cyan-cooler)))

;; Make code blocks more minimal, so that (i) the delimiter lines have
;; no background, (ii) the delimiter foreground is a subtle gray, and
;; (iii) the block contents have no distinct background either.  This
;; was the default in versions of the Modus themes before 4.4.0
(setq modus-themes-common-palette-overrides
      '((bg-prose-block-contents unspecified)
        (bg-prose-block-delimiter unspeficied)
        (fg-prose-block-delimiter fg-dim)))

;; Make the Org agenda use alternative and varied colors.
(setq modus-themes-common-palette-overrides
      '((date-common cyan)   ; default value (for timestamps and more)
        (date-deadline red-warmer)
        (date-event magenta-warmer)
        (date-holiday blue) ; for M-x calendar
        (date-now yellow-warmer)
        (date-scheduled magenta-cooler)
        (date-weekday cyan-cooler)
        (date-weekend blue-faint)))

;; Make the Org agenda use faint colors.
(setq modus-themes-common-palette-overrides
      '((date-common cyan-faint) ; for timestamps and more
        (date-deadline red-faint)
        (date-event fg-alt) ; default
        (date-holiday magenta) ; default (for M-x calendar)
        (date-now fg-main) ; default
        (date-scheduled yellow-faint)
        (date-weekday fg-alt)
        (date-weekend fg-dim)))

;; Make the Org agenda use more blue instead of yellow and red.
(setq modus-themes-common-palette-overrides
      '((date-common cyan) ; default value (for timestamps and more)
        (date-deadline blue-cooler)
        (date-event blue-faint)
        (date-holiday blue) ; for M-x calendar
        (date-now blue-faint)
        (date-scheduled blue)
        (date-weekday fg-main)
        (date-weekend fg-dim)))

;; Change dates to a set of more subtle combinations.  Deadlines are a
;; shade of magenta, scheduled dates are a shade of green that
;; complements that of the deadlines, weekday headings use the main
;; foreground color while weekends are a shade of gray.  The DONE
;; keyword is a faint blue-gray while TODO is yellow.
(setq modus-themes-common-palette-overrides
      '((date-deadline magenta-warmer)
        (date-scheduled green-cooler)
        (date-weekday fg-main)
        (date-event fg-dim)
        (date-now blue)
        (prose-done fg-alt)
        (prose-todo yellow)))

;; A nuanced accented background, combined with a suitable foreground.
(setq modus-themes-common-palette-overrides
      '((bg-prose-code bg-green-nuanced)
        (fg-prose-code green-cooler)

        (bg-prose-verbatim bg-magenta-nuanced)
        (fg-prose-verbatim magenta-warmer)

        (bg-prose-macro bg-blue-nuanced)
        (fg-prose-macro magenta-cooler)))

;; A more noticeable accented background, combined with a suitable foreground.
(setq modus-themes-common-palette-overrides
      '((bg-prose-code bg-sage)
        (fg-prose-code green-faint)

        (bg-prose-verbatim bg-ochre)
        (fg-prose-verbatim red-faint)

        (bg-prose-macro bg-lavender)
        (fg-prose-macro blue-faint)))

;; Leave the backgrounds without a color and simply make the foregrounds more intense.
(setq modus-themes-common-palette-overrides
      '((bg-prose-code unspecified)
        (fg-prose-code green-intense)

        (bg-prose-verbatim unspecified)
        (fg-prose-verbatim magenta-intense)

        (bg-prose-macro unspecified)
        (fg-prose-macro cyan-intense)))

From: Protesilaos <info@protesilaos.com>
To: Modus-Themes Development <~protesilaos/modus-themes@lists.sr.ht>
Subject: Test subject
--- Headers above this line; message and citations below ---
This is some sample text

> > Older quote
> Newer quote

;; Reduce the intensity of mail citations and headers
(setq modus-themes-common-palette-overrides
      '((mail-cite-0 cyan-faint)
        (mail-cite-1 yellow-faint)
        (mail-cite-2 green-faint)
        (mail-cite-3 red-faint)
        (mail-part olive)
        (mail-recipient indigo)
        (mail-subject maroon)
        (mail-other slate)))

;; Make mail citations more intense; adjust the headers accordingly
(setq modus-themes-common-palette-overrides
      '((mail-cite-0 blue)
        (mail-cite-1 yellow)
        (mail-cite-2 green)
        (mail-cite-3 magenta)
        (mail-part magenta-cooler)
        (mail-recipient cyan)
        (mail-subject red-warmer)
        (mail-other cyan-cooler)))

;; Make all citations faint and neutral; make most headers green but
;; use red for the subject lie so that it stands out
(setq modus-themes-common-palette-overrides
      '((mail-cite-0 fg-dim)
        (mail-cite-1 fg-alt)
        (mail-cite-2 fg-dim)
        (mail-cite-3 fg-alt)
        (mail-part yellow-cooler)
        (mail-recipient green-cooler)
        (mail-subject red-cooler)
        (mail-other green)))

;; A background with no specific foreground (use foreground of
;; underlying text)
(setq modus-themes-common-palette-overrides
      '((bg-region bg-ochre) ; try to replace `bg-ochre' with `bg-lavender', `bg-sage'
        (fg-region unspecified)))

;; Subtle gray with a prominent blue foreground
(setq modus-themes-common-palette-overrides
      '((bg-region bg-dim)
        (fg-region blue-cooler)))

;; Intense magenta background combined with the main foreground
(setq modus-themes-common-palette-overrides
      '((bg-region bg-magenta-intense)
        (fg-region fg-main)))

;; Make the background an intense yellow
(setq modus-themes-common-palette-overrides
      '((bg-hover bg-yellow-intense)))

;; Make the background subtle green
(setq modus-themes-common-palette-overrides
      '((bg-hover bg-green-subtle)))

;; Make the underlines less intense
(setq modus-themes-common-palette-overrides
      '((underline-err red-faint)
        (underline-warning yellow-faint)
        (underline-note cyan-faint)))

;; Change the color-coding of the underlines
(setq modus-themes-common-palette-overrides
      '((underline-err yellow-intense)
        (underline-warning magenta-intense)
        (underline-note green-intense)))

;; Make line numbers less intense
(setq modus-themes-common-palette-overrides
      '((fg-line-number-inactive "gray50")
        (fg-line-number-active fg-main)
        (bg-line-number-inactive unspecified)
        (bg-line-number-active unspecified)))

;; Like the above, but use a shade of red for the current line number
(setq modus-themes-common-palette-overrides
      '((fg-line-number-inactive "gray50")
        (fg-line-number-active red-cooler)
        (bg-line-number-inactive unspecified)
        (bg-line-number-active unspecified)))

;; Make all numbers more intense, use a more pronounce gray
;; background, and make the current line have a colored background
(setq modus-themes-common-palette-overrides
      '((fg-line-number-inactive fg-main)
        (fg-line-number-active fg-main)
        (bg-line-number-inactive bg-inactive)
        (bg-line-number-active bg-cyan-intense)))

;; Diffs with only foreground colors.  Word-wise ("refined") diffs
;; have a gray background to draw attention to themselves.
(setq modus-themes-common-palette-overrides
      '((bg-added           unspecified)
        (bg-added-faint     unspecified)
        (bg-added-refine    bg-inactive)
        (fg-added           green)
        (fg-added-intense   green-intense)

        (bg-changed         unspecified)
        (bg-changed-faint   unspecified)
        (bg-changed-refine  bg-inactive)
        (fg-changed         yellow)
        (fg-changed-intense yellow-intense)

        (bg-removed         unspecified)
        (bg-removed-faint   unspecified)
        (bg-removed-refine  bg-inactive)
        (fg-removed         red)
        (fg-removed-intense red-intense)

        (bg-diff-context    unspecified)))

;; Because deuteranopia cannot use the typical red-yellow-green
;; combination, we need to arrange for a yellow-purple-blue sequence.
;; Notice that the above covers the "common" overrides, so we do not
;; need to reproduce the whole list of them.
(setq modus-operandi-deuteranopia-palette-overrides
      '((fg-added           blue)
        (fg-added-intense   blue-intense)

        (fg-changed         magenta-cooler)
        (fg-changed-intense magenta-intense)

        (fg-removed         yellow-warmer)
        (fg-removed-intense yellow-intense)))

(setq modus-vivendi-deuteranopia-palette-overrides
      '((fg-added           blue)
        (fg-added-intense   blue-intense)

        (fg-changed         magenta-cooler)
        (fg-changed-intense magenta-intense)

        (fg-removed         yellow)
        (fg-removed-intense yellow-intense)))

(setq modus-operandi-deuteranopia-palette-overrides
      '((bg-changed         "#ffdfa9")
        (bg-changed-faint   "#ffefbf")
        (bg-changed-refine  "#fac090")
        (bg-changed-fringe  "#d7c20a")
        (fg-changed         "#553d00")
        (fg-changed-intense "#655000")

        (bg-removed         "#ffd8d5")
        (bg-removed-faint   "#ffe9e9")
        (bg-removed-refine  "#f3b5af")
        (bg-removed-fringe  "#d84a4f")
        (fg-removed         "#8f1313")
        (fg-removed-intense "#aa2222")))

(setq modus-vivendi-deuteranopia-palette-overrides
      '((bg-changed         "#363300")
        (bg-changed-faint   "#2a1f00")
        (bg-changed-refine  "#4a4a00")
        (bg-changed-fringe  "#8a7a00")
        (fg-changed         "#efef80")
        (fg-changed-intense "#c0b05f")

        (bg-removed         "#4f1119")
        (bg-removed-faint   "#380a0f")
        (bg-removed-refine  "#781a1f")
        (bg-removed-fringe  "#b81a1f")
        (fg-removed         "#ffbfbf")
        (fg-removed-intense "#ff9095")))

7.4 DIY More accurate colors in terminal emulators

[ This is based on partial information. Please help verify and/or expand these findings. ]

The graphical version of Emacs can reproduce color values accurately. Whereas things get more tricky when Emacs is used in a terminal emulator, because the terminals’ own capabilities determine the number of colors that may be displayed: the Modus themes don’t look as good in that case.

There is, however, a way to instruct supported terminal emulators to use more accurate colors. In a shell prompt type ‘toe -a | grep direct’ to get a list of relevant terminfo entries. There should be items such as ‘xterm-direct’, ‘alacritty-direct’, ‘kitty-direct’. Once you find the one that corresponds to your terminal, call Emacs with an environment variable like ‘TERM=xterm-direct’. Example that can be adapted to shell aliases:

TERM=xterm-direct emacsclient -nw

Another example that can be bound to a key:

TERM=xterm-direct uxterm -e emacsclient -nw

7.5 DIY Range of color with terminal emulators

[ This is based on partial information. Please help verify and/or expand these findings. ]

When Emacs runs in a non-windowed session its color reproduction capacity is framed or determined by the underlying terminal emulator (More accurate colors in terminal emulators). Emacs cannot produce a color that lies outside the range of what the terminal’s color palette renders possible.

This is immediately noticeable when the terminal’s first 16 codes do not include a pure black value for the ‘termcol0’ entry and a pure white for ‘termcol15’. Emacs cannot set the correct background (white for modus-operandi; black for modus-vivendi) or foreground (inverse of the background). It thus falls back to the closest approximation, which seldom is appropriate for the purposes of the Modus themes.

In such a case, the user is expected to update their terminal’s color palette such as by adapting these resources (Preview theme colors):

! Theme: modus-operandi
! Description: XTerm port of modus-operandi (Modus themes for GNU Emacs)
! Author: Protesilaos Stavrou, <https://protesilaos.com>
xterm*background: #ffffff
xterm*foreground: #000000
xterm*color0:     #000000
xterm*color1:     #a60000
xterm*color2:     #005e00
xterm*color3:     #813e00
xterm*color4:     #0031a9
xterm*color5:     #721045
xterm*color6:     #00538b
xterm*color7:     #bfbfbf
xterm*color8:     #595959
xterm*color9:     #972500
xterm*color10:    #315b00
xterm*color11:    #70480f
xterm*color12:    #2544bb
xterm*color13:    #5317ac
xterm*color14:    #005a5f
xterm*color15:    #ffffff

! Theme: modus-vivendi
! Description: XTerm port of modus-vivendi (Modus themes for GNU Emacs)
! Author: Protesilaos Stavrou, <https://protesilaos.com>
xterm*background: #000000
xterm*foreground: #ffffff
xterm*color0:     #000000
xterm*color1:     #ff8059
xterm*color2:     #44bc44
xterm*color3:     #d0bc00
xterm*color4:     #2fafff
xterm*color5:     #feacd0
xterm*color6:     #00d3d0
xterm*color7:     #bfbfbf
xterm*color8:     #595959
xterm*color9:     #ef8b50
xterm*color10:    #70b900
xterm*color11:    #c0c530
xterm*color12:    #79a8ff
xterm*color13:    #b6a0ff
xterm*color14:    #6ae4b9
xterm*color15:    #ffffff

7.6 DIY Per-theme customization settings

If you prefer to maintain different customization options between the two themes, it is best you write your own functions that first set those options and then load the relevant theme. The following code does exactly that by simply differentiating the two themes on the choice of bold constructs in code syntax (enabled for one, disabled for the other).

(defun my-demo-modus-operandi ()
  (interactive)
  (setq modus-themes-bold-constructs t) ; ENABLE bold
  (modus-themes-load-theme 'modus-operandi))

(defun my-demo-modus-vivendi ()
  (interactive)
  (setq modus-themes-bold-constructs nil) ; DISABLE bold
  (modus-themes-load-theme 'modus-vivendi))

(defun my-demo-modus-themes-toggle ()
  (if (eq (car custom-enabled-themes) 'modus-operandi)
      (my-demo-modus-vivendi)
    (my-demo-modus-operandi)))

Then assign my-demo-modus-themes-toggle to a key instead of the equivalent the themes provide.

For a more elaborate design, it is better to inspect the source code of modus-themes-toggle and relevant functions.

Reload the theme for changes to take effect.

7.7 DIY Do not extend the region background

By the default, the background of the region face extends from the end of the line to the edge of the window. To limit it to the end of the line, we need to override the face’s ‘:extend’ attribute. Adding this to the Emacs configuration file will suffice:

;; Do not extend `region' background past the end of the line.
(custom-set-faces
 '(region ((t :extend nil))))

Make the region preserve text colors, plus other styles.

7.8 DIY Add padding to the mode line

[ Consider using the spacious-padding package from GNU ELPA (by Protesilaos) for more than just the mode line. ]

Emacs faces do not have a concept of “padding” for the space between the text and its box boundaries. We can approximate the effect by adding a ‘:box’ attribute, making its border several pixels thick, and using the mode line’s background color for it. This way the thick border will not stand out and will appear as a continuation of the mode line.

Use theme colors in code with modus-themes-with-colors.

(defun my-modus-themes-custom-faces (&rest _)
  (modus-themes-with-colors
    (custom-set-faces
     ;; Add "padding" to the mode lines
     `(mode-line ((,c :box (:line-width 10 :color ,bg-mode-line-active))))
     `(mode-line-inactive ((,c :box (:line-width 10 :color ,bg-mode-line-inactive)))))))

(add-hook 'modus-themes-after-load-theme-hook #'my-modus-themes-custom-faces)

Using a hook at the post-load-theme phase.

The above has the effect of removing the border around the mode lines. In older versions of the themes, we provided the option for a padded mode line which could also have borders around it. Those were not real border, however, but an underline and an overline. Adjusting the above:

(defun my-modus-themes-custom-faces (&rest _)
  (modus-themes-with-colors
    (custom-set-faces
     ;; Add "padding" to the mode lines
     `(mode-line ((,c :underline ,border-mode-line-active
                      :overline ,border-mode-line-active
                      :box (:line-width 10 :color ,bg-mode-line-active))))
     `(mode-line-inactive ((,c :underline ,border-mode-line-inactive
                               :overline ,border-mode-line-inactive
                               :box (:line-width 10 :color ,bg-mode-line-inactive)))))))

;; ESSENTIAL to make the underline move to the bottom of the box:
(setq x-underline-at-descent-line t)

(add-hook 'modus-themes-after-load-theme-hook #'my-modus-themes-custom-faces)

The reason we no longer provide this option is because it depends on a non-nil value for x-underline-at-descent-line. That variable affects ALL underlines, including those of links. The effect is intrusive and looks awkward in prose.

As such, the Modus themes no longer provide that option but instead offer this piece of documentation to make the user fully aware of the state of affairs.

Reload the theme for changes to take effect.

7.9 DIY Remap face with local value

There are cases where we need to change the buffer-local attributes of a face. This might be because we have our own minor mode that reuses a face for a particular purpose, such as a line selection tool that activates hl-line-mode, but we wish to keep it distinct from other buffers. This is where face-remap-add-relative can be applied and may be combined with modus-themes-with-colors to deliver consistent results.

Use theme colors in code with modus-themes-with-colors.

In this example we will write a simple interactive function that adjusts the background color of the region face. This is the sample code:

(defvar my-rainbow-region-colors
  (modus-themes-with-colors
    `((red . ,bg-red-subtle)
      (green . ,bg-green-subtle)
      (yellow . ,bg-yellow-subtle)
      (blue . ,bg-blue-subtle)
      (magenta . ,bg-magenta-subtle)
      (cyan . ,bg-cyan-subtle)))
  "Sample list of color values for `my-rainbow-region'.")

(defun my-rainbow-region (color)
  "Remap buffer-local attribute of `region' using COLOR."
  (interactive
   (list
    (completing-read "Pick a color: " my-rainbow-region-colors)))
  (face-remap-add-relative
   'region
   `( :background ,(alist-get (intern color) my-rainbow-region-colors)
      :foreground ,(face-attribute 'default :foreground))))

When my-rainbow-region is called interactively, it prompts for a color to use. The list of candidates is drawn from the car of each association in my-rainbow-region-colors (so “red”, “green”, etc.).

To extend this principle, we may write wrapper functions that pass a color directly. Those can be useful in tandem with hooks. Consider this example:

(defun my-rainbow-region-magenta ()
  (my-rainbow-region 'magenta))

(add-hook 'diff-mode-hook #'my-rainbow-region-magenta)

Whenever we enter a diff-mode buffer, we now get a magenta-colored region.

Perhaps you may wish to generalize those findings in to a set of functions that also accept an arbitrary face. We shall leave the experimentation up to you.

Reload the theme for changes to take effect.

7.10 DIY Font configurations for Org and others

[ Consider using the fontaine package from GNU ELPA (by Protesilaos) for all font-related configurations. ]

The themes are designed to optionally cope well with mixed font configurations. This mostly concerns org-mode and markdown-mode, though expect to find it elsewhere like in Info-mode.

Option for font mixing.

In practice it means that the user can safely opt for a more prose-friendly proportionately spaced typeface as their default, while spacing-sensitive elements like tables and inline code always use a monospaced font, by inheriting from the fixed-pitch face.

Users can try the built-in M-x variable-pitch-mode to see the effect in action.

To make everything use your desired font families, you need to configure the variable-pitch (proportional spacing) and fixed-pitch (monospaced) faces respectively. It may also be convenient to set your main typeface by configuring the default face the same way.

Put something like this in your initialization file (also consider reading the doc string of set-face-attribute):

;; Main typeface
(set-face-attribute 'default nil :family "DejaVu Sans Mono" :height 110)

;; Proportionately spaced typeface
(set-face-attribute 'variable-pitch nil :family "DejaVu Serif" :height 1.0)

;; Monospaced typeface
(set-face-attribute 'fixed-pitch nil :family "DejaVu Sans Mono" :height 1.5)

Or employ the face-attribute function to read an existing value, such as if you want to make fixed-pitch use the font family of the default face:

(set-face-attribute 'fixed-pitch nil :family (face-attribute 'default :family))

The next section shows how to make those work in a more elaborate setup that is robust to changes between the Modus themes.

Configure bold and italic faces.

Note the differences in the :height property. The default face must specify an absolute value, which is the point size × 10. So if you want to use a font at point size ‘11’, you set the height to ‘110’.¹ Whereas every other face must either not specify a height or have a value that is relative to the default, represented as a floating point. If you use an integer, then that means an absolute height. This is of paramount importance: it ensures that all fonts can scale gracefully when using something like the text-scale-adjust command which only operates on the base font size (i.e. the default face’s absolute height).

Note for EWW and Elfeed fonts.

7.11 DIY Configure bold and italic faces

[ Consider using the fontaine package from GNU ELPA (by Protesilaos) for all font-related configurations. ]

The Modus themes do not hardcode a :weight or :slant attribute in the thousands of faces they cover. Instead, they configure the generic faces called bold and italic to use the appropriate styles and then instruct all relevant faces that require emphasis to inherit from them.

This practically means that users can change the particularities of what it means for a construct to be bold/italic, by tweaking the bold and italic faces. Cases where that can be useful include:

• The default typeface does not have a variant with slanted glyphs (e.g. Fira Mono/Code as of this writing on 2021-07-07), so the user wants to add another family for the italics, such as Hack.
• The typeface of choice provides a multitude of weights and the user prefers the light one by default. To prevent the bold weight from being too heavy compared to the light one, they opt to make bold use a semibold weight.
• The typeface distinguishes between oblique and italic forms by providing different font variants (the former are just slanted versions of the upright forms, while the latter have distinguishing features as well). In this case, the user wants to specify the font that applies to the italic face.

To achieve those effects, one must first be sure that the fonts they use have support for those features. It then is a matter of following the instructions for all typeface tweaks.

Font configurations for Org and others.

In this example, we set the default font family to Fira Code, while we choose to render italics in the Hack typeface (obviously you need to pick fonts that work well together):

(set-face-attribute 'default nil :family "Fira Code" :height 110)
(set-face-attribute 'italic nil :family "Hack")

And here we play with different weights, using Source Code Pro:

(set-face-attribute 'default nil :family "Source Code Pro" :height 110 :weight 'light)
(set-face-attribute 'bold nil :weight 'semibold)

To reset the font family, one can use this:

(set-face-attribute 'italic nil :family 'unspecified)

To ensure that the effects persist after switching between the Modus themes (such as with M-x modus-themes-toggle), the user needs to write their configurations to a function and pass it to the modus-themes-after-load-theme-hook (Enable and load). This is necessary because themes set the styles of faces upon activation, overriding prior values where conflicts occur between the previous and the current states (otherwise changing themes would not be possible).

A theme-agnostic hook for theme loading.

This is a minimal setup to preserve font configurations across theme load phases. For a more permanent setup, it is better to rely on the custom-set-faces function: set-face-attribute works just fine, though it probably is better suited for quick previews or for smaller scale operations (custom-set-faces follows the format used in the source code of the themes, which can make it easier to redefine faces in bulk).

;; our generic function
(defun my-modes-themes-bold-italic-faces (&rest _)
  (set-face-attribute 'default nil :family "Source Code Pro" :height 110)
  (set-face-attribute 'bold nil :weight 'semibold))

;; or use this if you configure a lot of face and attributes and
;; especially if you plan to use `modus-themes-with-colors', as shown
;; elsewhere in the manual
(defun my-modes-themes-bold-italic-faces (&rest _)
  (custom-set-faces
   '(default ((t :family "Source Code Pro" :height 110)))
   '(bold ((t :weight semibold)))))

;; and here is the hook
(add-hook 'modus-themes-after-load-theme-hook #'my-modes-themes-bold-italic-faces)

Use theme colors in code with modus-themes-with-colors.

Using a hook at the post-load-theme phase.

Reload the theme for changes to take effect.

7.12 DIY Custom Org todo keyword and priority faces

Users of org-mode have the option to configure various keywords and priority cookies to better match their workflow. User options are org-todo-keyword-faces and org-priority-faces.

As those are meant to be custom faces, it is futile to have the themes guess what each user wants to use, which keywords to target, and so on. Instead, we can provide guidelines on how to customize things to one’s liking with the intent of retaining the overall aesthetic of the themes.

Please bear in mind that the end result of those is not controlled by the active Modus theme but by how Org maps faces to its constructs. Editing those while org-mode is active requires re-initialization of the mode with M-x org-mode-restart for changes to take effect.

Let us assume you wish to visually differentiate your keywords. You have something like this:

(setq org-todo-keywords
      '((sequence "TODO(t)" "|" "DONE(D)" "CANCEL(C)")
        (sequence "MEET(m)" "|" "MET(M)")
        (sequence "STUDY(s)" "|" "STUDIED(S)")
        (sequence "WRITE(w)" "|" "WROTE(W)")))

You could then use a variant of the following to inherit from a face that uses the styles you want and also to preserve the attributes applied by the org-todo face (in case there is a difference between the two):

(setq org-todo-keyword-faces
      '(("MEET" . (:inherit (bold org-todo)))
        ("STUDY" . (:inherit (warning org-todo)))
        ("WRITE" . (:inherit (shadow org-todo)))))

This will refashion the keywords you specify, while letting the other items in org-todo-keywords use their original styles, which are defined in the org-todo and org-done faces.

If you want back the defaults, try specifying just the org-todo face:

(setq org-todo-keyword-faces
      '(("MEET" . org-todo)
        ("STUDY" . org-todo)
        ("WRITE" . org-todo)))

Or set org-todo-keyword-faces to nil.

When you inherit from multiple faces, you need to do it the way it is shown further above. The order is significant: the first entry is applied on top of the second, overriding any attributes that are explicitly set for both of them: any attribute that is not specified is not overridden, so, for example, if org-todo has a background and a foreground, while font-lock-type-face only has a foreground, the merged face will include the background of the former and the foreground of the latter. If you do not want to blend multiple faces, you only specify one by name without parentheses or an ‘:inherit’ keyword. A pattern of ‘keyword . face’ will suffice.

Both approaches can be used simultaneously, as illustrated in this configuration of the priority cookies:

(setq org-priority-faces
      '((?A . (:inherit (bold org-priority)))
        (?B . org-priority)
        (?C . (:inherit (shadow org-priority)))))

To find all the faces that are loaded in your current Emacs session, use M-x list-faces-display. Try M-x describe-variable as well and then specify the name of each of those Org variables demonstrated above. Their documentation strings will offer you further guidance.

Recall that the themes let you retrieve a color from their palette. Do it if you plan to control face attributes.

Check color combinations.

7.13 DIY Custom Org emphasis faces

Org provides the user option org-emphasis-alist which associates a character with a face, list of faces, or face attributes. The default specification of that variable looks like this:

(setq org-emphasis-alist
      '(("*" bold)
        ("/" italic)
        ("_" underline)
        ("=" org-verbatim verbatim)
        ("~" org-code verbatim)
        ("+" (:strike-through t))))

With the exception of org-verbatim and org-code faces, everything else uses the corresponding type of emphasis: a bold typographic weight, or italicised, underlined, and struck through text.

The best way for users to add some extra attributes, such as a foreground color, is to define their own faces and assign them to the given emphasis marker/character.

This is a custom face that extends the standard bold face with a red foreground value (so it colorises the text in addition to the bold weight):

(defface my-org-emphasis-bold
  '((default :inherit bold)
    (((class color) (min-colors 88) (background light))
     :foreground "#a60000")
    (((class color) (min-colors 88) (background dark))
     :foreground "#ff8059"))
  "My bold emphasis for Org.")

This face definition reads as follows:

• Always inherit the bold face (Configure bold and italic faces).
• For versions of Emacs that support at least 88 colors (graphical Emacs, for example) and use a light background, apply the ‘#a60000’ value.
• For the same kind of Emacs that has a dark background use the ‘#ff8059’ color instead.

Same principle for how to extend italic and underline with, for example, green and yellow hues, respectively:

(defface my-org-emphasis-italic
  '((default :inherit italic)
    (((class color) (min-colors 88) (background light))
     :foreground "#005e00")
    (((class color) (min-colors 88) (background dark))
     :foreground "#44bc44"))
  "My italic emphasis for Org.")

(defface my-org-emphasis-underline
  '((default :inherit underline)
    (((class color) (min-colors 88) (background light))
     :foreground "#813e00")
    (((class color) (min-colors 88) (background dark))
     :foreground "#d0bc00"))
  "My underline emphasis for Org.")

In the case of a strike-through effect, we have no generic face to inherit from, so we can write it as follows to also change the foreground to a more subtle gray:

(defface my-org-emphasis-strike-through
  '((default :strike-through t)
    (((class color) (min-colors 88) (background light))
     :foreground "#505050")
    (((class color) (min-colors 88) (background dark))
     :foreground "#a8a8a8"))
  "My strike-through emphasis for Org.")

Or we can just change the color of the line that strikes through the text to, for example, a shade of red:

(defface my-org-emphasis-strike-through
  '((((class color) (min-colors 88) (background light))
     :strike-through "#972500")
    (((class color) (min-colors 88) (background dark))
     :strike-through "#ef8b50"))
  "My strike-through emphasis for Org.")

It is possible to combine those effects:

(defface my-org-emphasis-strike-through
  '((((class color) (min-colors 88) (background light))
     :strike-through "#972500" :foreground "#505050")
    (((class color) (min-colors 88) (background dark))
     :strike-through "#ef8b50" :foreground "#a8a8a8"))
  "My strike-through emphasis for Org.")

One may inspect the variables modus-themes-operandi-colors and modus-themes-vivendi-colors for possible color values. Or call the command modus-themes-list-colors to show a buffer that previews each entry in the palette.

Visualize the active Modus theme’s palette.

Once we have defined the faces we need, we must update the org-emphasis-alist. Given that org-verbatim and org-code are already styled by the themes, it probably is best not to edit them:

(setq org-emphasis-alist
      '(("*" my-org-emphasis-bold)
        ("/" my-org-emphasis-italic)
        ("_" my-org-emphasis-underline)
        ("=" org-verbatim verbatim)
        ("~" org-code verbatim)
        ("+" my-org-emphasis-strike-through)))

That’s it! For changes to take effect in already visited Org files, invoke M-x org-mode-restart.

7.14 DIY Use colored Org source blocks per language

DIY Make Org block colors more or less colorful.

In versions of the Modus themes before ‘4.4.0’ there was an option to change the coloration of Org source blocks so that certain languages would have a distinctly colored background. This was not flexible enough, because (i) we cannot cover all languages effectively and (ii) the user had no choice over the ‘language --> color’ mapping.

As such, the old user option is no more. Users can use the following to achieve what they want:

[ All this is done by setting the Org user option org-src-block-faces, so it is not related to the palette overrides mechanism provided by the Modus themes. ]

(defun my-modus-themes-org-block-faces (&rest _)
  (modus-themes-with-colors
    ;; The `org-src-block-faces' does not get re-applied in existing
    ;; Org buffers.  Do M-x org-mode-restart for changes to take
    ;; effect.
    (setq org-src-block-faces
          `(("emacs-lisp" modus-themes-nuanced-magenta)
            ("elisp" modus-themes-nuanced-magenta)
            ("clojure" modus-themes-nuanced-magenta)
            ("clojurescript" modus-themes-nuanced-magenta)
            ("c" modus-themes-nuanced-blue)
            ("c++" modus-themes-nuanced-blue)
            ("sh" modus-themes-nuanced-yellow)
            ("shell" modus-themes-nuanced-yellow)
            ("python" modus-themes-nuanced-yellow)
            ("ipython" modus-themes-nuanced-yellow)
            ("r" modus-themes-nuanced-yellow)
            ("html" modus-themes-nuanced-green)
            ("xml" modus-themes-nuanced-green)
            ("css" modus-themes-nuanced-red)
            ("scss" modus-themes-nuanced-red)
            ("yaml" modus-themes-nuanced-cyan)
            ("conf" modus-themes-nuanced-cyan)
            ("docker" modus-themes-nuanced-cyan)))))

(add-hook 'modus-themes-after-load-theme-hook #'my-modus-themes-org-block-faces)

DIY Use a hook at the post-load-theme phase.

Note that the org-src-block-faces accepts a named face, as shown above, as well as a list of face attributes. The latter approach is not good enough because it hardcodes values in such a way that an org-mode-restart is necessary. Whereas the indirection of the named face lets the theme change the values while Org buffers continue to show the right colors.

Still, if a user prefers to hardcode face attributes, here is the idea:

;; This is for the sake of completeness.  I DO NOT RECOMMEND THIS
;; method because it hardcodes values and thus requires
;; `org-mode-restart' every time you change a theme.
(defun my-modus-themes-org-block-faces (&rest _)
  (modus-themes-with-colors
    (setq org-src-block-faces
          `(("emacs-lisp" (:inherit org-block :background ,bg-magenta-nuanced))
            ("elisp" (:inherit org-block :background ,bg-magenta-nuanced))
            ("clojure" (:inherit org-block :background ,bg-magenta-nuanced))
            ("clojurescript" (:inherit org-block :background ,bg-magenta-nuanced))
            ("c" (:inherit org-block :background ,bg-blue-nuanced))
            ("c++" (:inherit org-block :background ,bg-blue-nuanced))
            ("sh" (:inherit org-block :background ,bg-yellow-nuanced))
            ("shell" (:inherit org-block :background ,bg-yellow-nuanced))
            ("python" (:inherit org-block :background ,bg-yellow-nuanced))
            ("ipython" (:inherit org-block :background ,bg-yellow-nuanced))
            ("r" (:inherit org-block :background ,bg-yellow-nuanced))
            ("html" (:inherit org-block :background ,bg-green-nuanced))
            ("xml" (:inherit org-block :background ,bg-green-nuanced))
            ("css" (:inherit org-block :background ,bg-red-nuanced))
            ("scss" (:inherit org-block :background ,bg-red-nuanced))
            ("yaml" (:inherit org-block :background ,bg-cyan-nuanced))
            ("conf" (:inherit org-block :background ,bg-cyan-nuanced))
            ("docker" (:inherit org-block :background ,bg-cyan-nuanced))))))

(add-hook 'modus-themes-after-load-theme-hook #'my-modus-themes-org-block-faces)

7.15 DIY Measure color contrast

The themes provide the functions modus-themes-wcag-formula and modus-themes-contrast. The former is a direct implementation of the WCAG formula: https://www.w3.org/TR/WCAG20-TECHS/G18.html. It calculates the relative luminance of a color value that is expressed in hexadecimal RGB notation. While the latter function is just a convenient wrapper for comparing the relative luminance between two colors.

In practice, one needs to work only with modus-themes-contrast. It accepts two color values and returns their contrast ratio. Values range from 1 to 21 (lowest to highest). The themes are designed to always be equal or higher than 7 for each combination of background and foreground that they use (this is the WCAG AAA standard—the most demanding of its kind).

A couple of examples (rounded numbers):

;; Pure white with pure green
(modus-themes-contrast "#ffffff" "#00ff00")
;; => 1.37
;; That is an outright inaccessible combo

;; Pure black with pure green
(modus-themes-contrast "#000000" "#00ff00")
;; => 15.3
;; That is a highly accessible combo

It does not matter which color value comes first. The ratio is always the same.

If one does not wish to read all the decimal points, it is possible to try something like this:

(format "%0.2f" (modus-themes-contrast "#000000" "#00ff00"))

While it is fine to perform such calculations on a case-by-case basis, it is preferable to implement formulas and tables for more demanding tasks. Such instruments are provided by org-mode or orgtbl-mode, both of which are built into Emacs. Below is such a table that derives the contrast ratio of all colors in the first column (pure red, green, blue) relative to the color specified in the first row of the second column (pure white) and rounds the results:

|         | #ffffff |
|---------+---------|
| #ff0000 |    4.00 |
| #00ff00 |    1.37 |
| #0000ff |    8.59 |
#+tblfm: $2='(modus-themes-contrast $1 @1$2);%0.2f

To measure color contrast one needs to start from a known value. This typically is the background. The Modus themes define an expanded palette in large part because certain colors are only meant to be used in combination with some others. Consult the source code for the minutia and relevant commentary.

Such knowledge may prove valuable while attempting to customize the theme’s color palette.

7.16 DIY Load theme depending on time of day

While we do provide modus-themes-toggle to manually switch between the themes, users may also set up their system to perform such a task automatically at sunrise and sunset.

This can be accomplished by specifying the coordinates of one’s location using the built-in solar.el and then configuring the circadian package:

(use-package solar                      ; built-in
  :config
  (setq calendar-latitude 35.17
        calendar-longitude 33.36))

(use-package circadian                  ; you need to install this
  :ensure t
  :after solar
  :config
  (setq circadian-themes '((:sunrise . modus-operandi)
                           (:sunset  . modus-vivendi)))
  (circadian-setup))

7.17 DIY Backdrop for pdf-tools

Most PDF files use a white background for their page, making it impossible to discern the file’s boundaries in the buffer while using the Modus Operandi theme. To introduce a distinction between the buffer’s backdrop and the PDF page’s background, the former must be rendered as some shade of gray. Ideally, pdf-tools would provide a face that the themes could support directly, though this does not seem to be the case for the time being. We must thus employ the face remapping technique that is documented elsewhere in this document to change the buffer-local value of the default face.

Remap face with local value.

To remap the buffer’s backdrop, we start with a function like this one:

(defun my-pdf-tools-backdrop (&rest _)
  (modus-themes-with-colors
    (face-remap-add-relative
     'default
     `(:background ,bg-dim))))

(add-hook 'pdf-tools-enabled-hook #'my-pdf-tools-backdrop)

The idea is to assign that function to a hook that gets called when pdf-tools renders the document: pdf-tools-enabled-hook. This is enough when you only use one theme. However it has the downside of setting the background color value only at render time. In other words, the face remapping function does not get evaluated anew whenever the theme changes, such as upon invoking M-x modus-themes-toggle (Option for which themes to toggle).

To have our face remapping adapt gracefully while switching between the Modus themes, we need to also account for the current theme and control the activation of pdf-view-midnight-minor-mode. To which end we arrive at something like the following, which builds on the above example:

(defun my-pdf-tools-backdrop (&rest _)
  (modus-themes-with-colors
    (face-remap-add-relative
     'default
     `(:background ,bg-dim))))

(defun my-pdf-tools-midnight-mode-toggle (&rest _)
  (when (derived-mode-p 'pdf-view-mode)
    (if (eq (car custom-enabled-themes) 'modus-vivendi)
        (pdf-view-midnight-minor-mode 1)
      (pdf-view-midnight-minor-mode -1))
    (my-pdf-tools-backdrop)))

(defun my-pdf-tools-themes-toggle (&rest _)
  (mapc
   (lambda (buf)
     (with-current-buffer buf
       (my-pdf-tools-midnight-mode-toggle)))
   (buffer-list)))

(add-hook 'pdf-tools-enabled-hook #'my-pdf-tools-midnight-mode-toggle)
(add-hook 'modus-themes-after-load-theme-hook #'my-pdf-tools-themes-toggle)

Using a hook at the post-load-theme phase.

With those in place, PDFs have a distinct backdrop for their page, while buffers with major-mode as pdf-view-mode automatically switches to dark mode when modus-themes-toggle is called.

Reload the theme for changes to take effect.

7.18 DIY Toggle themes without reloading them

Users who have a stable setup and who only ever need to toggle between the themes without triggering a full reload, are better off defining their own command which calls enable-theme instead of load-theme:

(defun my-modus-themes-toggle ()
  "Toggle between `modus-operandi' and `modus-vivendi' themes.
This uses `enable-theme' instead of the standard method of
`load-theme'.  The technicalities are covered in the Modus themes
manual."
  (interactive)
  (pcase (modus-themes--current-theme)
    ('modus-operandi (progn (enable-theme 'modus-vivendi)
                            (disable-theme 'modus-operandi)))
    ('modus-vivendi (progn (enable-theme 'modus-operandi)
                            (disable-theme 'modus-vivendi)))
    (_ (error "No Modus theme is loaded; evaluate `modus-themes-load-themes' first"))))

Differences between loading and enabling.

Recall that modus-themes-toggle uses load-theme.

7.19 DIY Use more spacious margins or padding in Emacs frames

[ UPDATE 2023-06-25: Instead of following these instructions, you can simply install my spacious-padding package from GNU ELPA. It implements the padding and provides relevant user options. ]

By default, Emacs frames try to maximize the number of characters that fit in the current visible portion of the buffer. Users may prefer to have some extra padding instead. This can make Emacs frames look more pleasant, but also make it easier to identify the currently active window.

The way to implement such padding is two-fold:

1. In the ‘early-init.el’ file instruct Emacs to use a higher value for the internal-border-width of all frames, as well as for the right-divider-width. The former concerns the outer boundaries of Emacs frames, while the latter pertains to dividers between Emacs windows.
2. Make the relevant faces invisible by changing the value of their relevant attributes to that of the current theme’s main background.

The parameters of Emacs frames are specified in the variables initial-frame-alist and default-frame-alist. The “initial frame” refers to the first frame that appears on Emacs startup. The “default” refers to the fallback values that apply to all other frames that Emacs creates (unless those are explicitly overridden by a bespoke make-frame call).

In detail, first we use the same values for the two frame alist variables:

;; This must go in the early-init.el so that it applies to the initial
;; frame.
(dolist (var '(default-frame-alist initial-frame-alist))
  (add-to-list var '(right-divider-width . 20))
  (add-to-list var '(internal-border-width . 20)))

What the dolist does is to call add-to-list for the two variables we specify there. This economizes on typing.

Then we define a function that makes the relevant faces invisible. The reason we do this with a function is so we can hook it to the “post load” phase of a theme, thus applying the new background value (otherwise you keep the old background, which likely means that the faces will no longer be invisible).

(defun my-modus-themes-invisible-dividers (&rest _)
  "Make window dividers invisible.
Add this to the `modus-themes-post-load-hook'."
  (let ((bg (face-background 'default)))
    (custom-set-faces
     `(fringe ((t :background ,bg :foreground ,bg)))
     `(window-divider ((t :background ,bg :foreground ,bg)))
     `(window-divider-first-pixel ((t :background ,bg :foreground ,bg)))
     `(window-divider-last-pixel ((t :background ,bg :foreground ,bg))))))

(add-hook 'modus-themes-post-load-hook #'my-modus-themes-invisible-dividers)

Using a hook at the post-load-theme phase.

The above will work only for themes that belong to the Modus family. For users of Emacs version 29 or higher, there exists a theme-agnostic hook that takes a function with one argument—that of the theme—and calls in the the “post enable” phase of theme loading. Here is the above snippet, with the necessary tweaks:

(defun my-modus-themes-invisible-dividers (&rest _)
  "Make window dividers for THEME invisible."
  (let ((bg (face-background 'default)))
    (custom-set-faces
     `(fringe ((t :background ,bg :foreground ,bg)))
     `(window-divider ((t :background ,bg :foreground ,bg)))
     `(window-divider-first-pixel ((t :background ,bg :foreground ,bg)))
     `(window-divider-last-pixel ((t :background ,bg :foreground ,bg))))))

(add-hook 'enable-theme-functions #'my-modus-themes-invisible-dividers)

Users of older versions of Emacs can read the entry herein about defining their own theme-agnostic hook (A theme-agnostic hook for theme loading).

7.20 DIY Custom hl-todo colors

The hl-todo package provides the user option hl-todo-keyword-faces: it specifies a pair of keyword and corresponding color value. The Modus themes configure that option in the interest of legibility. While this works for our purposes, users may still prefer to apply their custom values, in which case the following approach is necessary:

(defun my-modus-themes-hl-todo-faces (&rest _)
  (setq hl-todo-keyword-faces '(("TODO" . "#ff0000")
                                ("HACK" . "#ffff00")
                                ("XXX" . "#00ffff")
                                ("NOTE" . "#ff00ff"))))

(add-hook 'modus-themes-after-load-theme-hook #'my-modus-themes-hl-todo-faces)

Using a hook at the post-load-theme phase.

Or include a let form, if needed:

(defun my-modus-themes-hl-todo-faces (&rest _)
  (let ((red "#ff0000")
        (blue "#0000ff"))
    (setq hl-todo-keyword-faces `(("TODO" . ,blue)
                                  ("HACK" . ,red)
                                  ("XXX" . ,red)
                                  ("NOTE" . ,blue)))))

(add-hook 'modus-themes-after-load-theme-hook #'my-modus-themes-hl-todo-faces)

Using a hook at the post-load-theme phase.

Normally, we do not touch user options, though this is an exception: otherwise the defaults are not always legible.

Reload the theme for changes to take effect.

7.21 DIY Add support for solaire-mode

The solaire-mode package dims the background of what it considers ancillary “UI” buffers, such as the minibuffer and Dired buffers. The Modus themes used to support Solaire on the premise that the user was (i) opting in to it, (ii) understood why certain buffers were more gray, and (iii) knew what other adjustments had to be made to prevent broken visuals (e.g. the default style of the modus-themes-completions uses a subtle gray background for the selection, which with Solaire becomes practically invisible).

However, the assumption that users opt in to this feature does not always hold true. There are cases where it is enabled by defaultsuch as in the popular Doom Emacs configuration. Thus, the unsuspecting user who loads modus-operandi or modus-vivendi without the requisite customizations is getting a sub-par experience; an experience that we did not intend and cannot genuinely fix.

Because the Modus themes are meant to work everywhere, we cannot make an exception for Doom Emacs and/or Solaire users. Furthermore, we shall not introduce hacks, such as by adding a check in all relevant faces to be adjusted based on Solaire or whatever other package. Hacks of this sort are unsustainable and penalize the entire userbase. Besides, the themes are built into Emacs and we must keep their standard high.

The fundamental constraint with Solaire is that Emacs does not have a real distinction between “content” and “UI” buffers. For themes to work with Solaire, they need to be designed around that package. Such is an arrangement that compromises on our accessibility standards and/or hinders our efforts to provide the best possible experience while using the Modus themes.

As such, solaire-mode is not—and will not be—supported by the Modus themes (or any other of my themes, for that matter). Users who want it must style the faces manually. Below is some sample code, based on what we cover at length elsewhere in this manual:

Advanced customization.

Use theme colors in code with modus-themes-with-colors.

(defun my-modus-themes-custom-faces (&rest _)
  (modus-themes-with-colors
    (custom-set-faces
     `(solaire-default-face ((,c :inherit default :background ,bg-dim :foreground ,fg-dim)))
     `(solaire-line-number-face ((,c :inherit solaire-default-face :foreground ,fg-dim)))
     `(solaire-hl-line-face ((,c :background ,bg-active)))
     `(solaire-org-hide-face ((,c :background ,bg-dim :foreground ,bg-dim))))))

(add-hook 'modus-themes-after-load-theme-hook #'my-modus-themes-custom-faces)

Using a hook at the post-load-theme phase.

Reload the theme for changes to take effect.

7.22 DIY Add support for meow-mode

The meow package provides a modal editing experience. It is meant to build on top of the key bindings the user is already familiar with. My problem as an outsider is that I cannot make sense of all the contexts where its faces are used in, so I cannot make a good choice of which styles to use. The following is but a basic attempt to get started.

;; This is not complete, because it is difficult for a non-user to
;; make sense of where all the faces are used in.
(defun my-modus-themes-custom-faces (&rest _)
  (modus-themes-with-colors
    (custom-set-faces
     ;; FIXME: What is a "region cursor" and should it differ from the position highlights below?
     `(meow-region-cursor-1 ((,c :inherit (bold modus-themes-reset-soft) :background ,bg-char-0)))
     `(meow-region-cursor-2 ((,c :inherit (bold modus-themes-reset-soft) :background ,bg-char-1)))
     `(meow-region-cursor-3 ((,c :inherit (bold modus-themes-reset-soft) :background ,bg-char-2)))

     `(meow-position-highlight-number-1 ((,c :inherit (bold modus-themes-reset-soft) :background ,bg-char-0)))
     `(meow-position-highlight-number-2 ((,c :inherit (bold modus-themes-reset-soft) :background ,bg-char-1)))
     `(meow-position-highlight-number-3 ((,c :inherit (bold modus-themes-reset-soft) :background ,bg-char-2))))))

(add-hook 'enable-theme-functions #'my-modus-themes-custom-faces)

Using a hook at the post-load-theme phase.

7.23 DIY Add support for combobulate

The combobulate package provides the means to operate on text that is underpinned by the tree-sitter program. Because this is a specialized case that requires intimate knowledge of the technicalities, I am not adding support for this package directly at the theme level. Users can try this instead:

(defun my-modus-themes-custom-faces (&rest _)
  (modus-themes-with-colors
    (custom-set-faces
     `(combobulate-active-indicator-face ((,c :foreground ,fg-main)))
     `(combobulate-dimmed-indicator-face ((,c :inherit shadow)))
     `(combobulate-error-indicator-face ((,c :inherit error)))
     `(combobulate-query-highlight-fiery-flames-face ((,c :inherit modus-themes-intense-red)))
     `(combobulate-query-highlight-gleaming-gold-face ((,c :inherit modus-themes-intense-yellow)))
     `(combobulate-query-highlight-majestic-mercury-face ((,c :inherit modus-themes-intense-cyan)))
     `(combobulate-query-highlight-mysterious-mauve-face ((,c :inherit modus-themes-intense-magenta)))
     `(combobulate-query-highlight-radiant-rind-face ((,c :inherit modus-themes-subtle-red)))
     `(combobulate-query-highlight-regal-ripples-face ((,c :inherit modus-themes-intense-blue)))
     `(combobulate-query-highlight-serene-shade-face ((,c :inherit modus-themes-subtle-green)))
     `(combobulate-query-highlight-silver-shadows-face ((,c :background ,bg-active :foreground ,fg-main)))
     `(combobulate-query-highlight-vibrant-veggie-face ((,c :inherit modus-themes-intense-green)))
     `(combobulate-query-query-anonymous-face ((,c :inherit modus-themes-bold :foreground ,fg-alt)))
     `(combobulate-query-query-builtin-face ((,c :inherit font-lock-builtin-face)))
     `(combobulate-query-query-constant-face ((,c :inherit font-lock-constant-face)))
     `(combobulate-query-query-doc-markup-face ((,c :inherit font-lock-doc-markup-face)))
     `(combobulate-query-query-keyword-face ((,c :inherit font-lock-keyword-face)))
     `(combobulate-query-query-predicate-builtin-face ((,c :inherit bold)))
     `(combobulate-query-query-string-face ((,c :inherit font-lock-string-face)))
     `(combobulate-refactor-choice-face ((,c :inherit modus-themes-slant :foreground ,info)))
     `(combobulate-refactor-cursor-face ((,c :foreground ,cursor)))
     `(combobulate-refactor-field-face ((,c :background ,bg-inactive :foreground ,fg-main :extend nil)))
     `(combobulate-refactor-highlight-face ((,c :inherit highlight)))
     `(combobulate-refactor-inactive-choice-face ((,c :inherit modus-themes-slant :foreground ,fg-dim)))
     `(combobulate-refactor-inactive-field-face ((,c :background ,bg-dim :foreground ,fg-dim :extend nil)))
     `(combobulate-refactor-label-face ((,c :inherit modus-themes-search-replace)))
     `(combobulate-tree-branch-face ((,c :inherit shadow)))
     `(combobulate-tree-highlighted-node-face ((,c :inherit success)))
     `(combobulate-tree-normal-node-face ((,c :foreground ,fg-main)))
     `(combobulate-tree-pulse-node-face ((,c :background ,bg-blue-intense :extend t))))))

(add-hook 'enable-theme-functions #'my-modus-themes-custom-faces)

Using a hook at the post-load-theme phase.

7.24 DIY Add support for howm

The howm package is a note-taking solution for Emacs. Users can add support for its faces with something like the following.

(defun my-modus-themes-custom-faces (&rest _)
  (modus-themes-with-colors
    (custom-set-faces
     `(action-lock-face ((,c :inherit button)))
     `(howm-mode-keyword-face (( )))
     `(howm-mode-ref-face ((,c :inherit link)))
     `(howm-mode-title-face ((,c :inherit modus-themes-heading-0)))
     `(howm-mode-wiki-face ((,c :inherit link)))
     `(howm-reminder-deadline-face ((,c :foreground ,date-deadline)))
     `(howm-reminder-late-deadline-face ((,c :inherit bold :foreground ,date-deadline)))
     `(howm-reminder-defer-face ((,c :foreground ,date-scheduled)))
     `(howm-reminder-scheduled-face ((,c :foreground ,date-scheduled)))
     `(howm-reminder-done-face ((,c :foreground ,prose-done)))
     `(howm-reminder-todo-face ((,c :foreground ,prose-todo)))
     `(howm-reminder-normal-face ((,c :foreground ,date-common)))
     `(howm-reminder-today-face ((,c :inherit bold :foreground ,date-common)))
     `(howm-reminder-tomorrow-face ((,c :inherit bold :foreground ,date-scheduled)))
     `(howm-simulate-todo-mode-line-face ((,c :inherit bold)))
     `(howm-view-empty-face (( )))
     `(howm-view-hilit-face ((,c :inherit match)))
     `(howm-view-name-face ((,c :inherit bold)))
     `(iigrep-counts-face1 ((,c :foreground ,rainbow-1)))
     `(iigrep-counts-face2 ((,c :foreground ,rainbow-2)))
     `(iigrep-counts-face3 ((,c :foreground ,rainbow-3)))
     `(iigrep-counts-face4 ((,c :foreground ,rainbow-4)))
     `(iigrep-counts-face5 ((,c :foreground ,rainbow-5))))))

(add-hook 'enable-theme-functions #'my-modus-themes-custom-faces)

7.25 DIY Use a hook at the post-load-theme phase

Many of the Do-It-Yourself (DIY) snippets provided herein make use of a hook to apply the desired changes. In most examples, this hook is the modus-themes-after-load-theme-hook (alias modus-themes-post-load-hook). This hook is provided by the Modus themes and is called at the end of one the following:

Command modus-themes-toggle

Option for which themes to toggle.

Command modus-themes-select

Select a Modus theme using minibuffer completion and then load it.

Function modus-themes-load-theme

Called only from Lisp, such as in the user’s init file, with the quoted symbol of a Modus theme as an argument (Option for disabling other themes while loading Modus). This function is used internally by modus-themes-toggle and modus-themes-select.

Users who switch between themes that are not limited to the Modus collection cannot benefit from the aforementioned hook: it only works with the Modus themes. A theme-agnostic hook is needed in such a case. Before Emacs 29, this had to be set up manually (DIY A theme-agnostic hook for theme loading). Starting with Emacs 29, the special hook enable-theme-functions works with anything that uses the basic enable-theme function.

To use the enable-theme-functions just add the given function to it the way it is done with every hook:

(add-hook 'enable-theme-functions 'MY-FUNCTION-HERE)

Functions added to enable-theme-functions accept a single ‘THEME’ argument. The examples shown in this manual use the pattern ‘(&rest _)’, which is how a function accepts one or more arguments but declares it will not use them (in plain terms, the code works with or without enable-theme-functions).

• DIY A theme-agnostic hook for theme loading

(defvar after-enable-theme-hook nil
   "Normal hook run after enabling a theme.")

(defun run-after-enable-theme-hook (&rest _args)
   "Run `after-enable-theme-hook'."
   (run-hooks 'after-enable-theme-hook))

(advice-add 'enable-theme :after #'run-after-enable-theme-hook)

8.1 Full support for packages or face groups

This list will always be updated to reflect the current state of the project. The idea is to offer an overview of the known status of all affected face groups. The items with an appended asterisk ‘*’ tend to have lots of extensions, so the “full support” may not be 100% true…

• ace-window
• agda2-mode
• all-the-icons
• all-the-icons-dired
• all-the-icons-ibuffer
• annotate
• ansi-color
• anzu
• auctex and TeX
• auto-dim-other-buffers
• avy
• bbdb
• binder
• breadcrumb
• bongo
• boon
• bookmark
• calendar and diary
• centaur-tabs
• change-log and log-view (such as vc-print-log, vc-print-root-log)
• chart
• cider
• circe
• citar
• clojure-mode
• column-enforce-mode
• company-mode*
• compilation-mode
• completions
• consult
• corfu
• corfu-candidate-overlay
• corfu-quick
• counsel*
• cperl-mode
• crontab-mode
• csv-mode
• ctrlf
• custom (what you get with M-x customize)
• dashboard
• deadgrep
• debbugs
• deft
• denote
• devdocs
• dictionary
• diff-hl
• diff-mode
• dim-autoload
• dired
• dired-async
• dired-git
• dired-git-info
• dired-narrow
• dired-subtree
• diredfl
• disk-usage
• display-fill-column-indicator-mode
• doom-modeline
• ediff
• ein (Emacs IPython Notebook)
• eglot
• el-search
• eldoc-box
• elfeed
• elfeed-score
• elpher
• embark
• ement
• emms
• enh-ruby-mode (enhanced-ruby-mode)
• epa
• erc
• ert
• erts-mode
• eshell
• eshell-fringe-status
• evil* (evil-mode)
• eww
• exwm
• eyebrowse
• flycheck
• flycheck-color-mode-line
• flycheck-indicator
• flymake
• flyspell
• flx
• focus
• fold-this
• font-lock (generic syntax highlighting)
• forge
• geiser
• git-commit
• git-gutter (and variants)
• git-rebase
• git-timemachine
• gnus
• gotest
• golden-ratio-scroll-screen
• helpful
• hexl-mode
• highlight-numbers
• highlight-parentheses (Note on highlight-parentheses.el)
• highlight-thing
• hl-fill-column
• hl-line-mode
• hl-todo
• hydra
• ibuffer
• icomplete
• ido-mode
• iedit
• iflipb
• image-dired
• imenu-list
• indium
• info
• info+ (info-plus)
• info-colors
• ioccur
• isearch, occur, etc.
• ivy*
• ivy-posframe
• jabber
• japanese-holidays
• jira (org-jira)
• jit-spell
• jinx
• journalctl-mode
• js2-mode
• julia
• kaocha-runner
• keycast
• kmacro-menu
• ledger-mode
• leerzeichen
• line numbers (display-line-numbers-mode and global variant)
• magit
• make-mode
• man
• marginalia
• markdown-mode
• markup-faces (adoc-mode)
• mb-depth
• mct
• messages
• minimap
• mode-line
• mood-line
• mpdel
• mu4e
• multiple-cursors
• nerd-icons
• nerd-icons-completion
• nerd-icons-dired
• nerd-icons-ibuffer
• neotree
• notmuch
• num3-mode
• nxml-mode
• olivetti
• orderless
• org*
• org-journal
• org-noter
• org-pomodoro
• org-recur
• org-roam
• org-superstar
• org-table-sticky-header
• org-tree-slide
• origami
• outline-mode
• outline-minor-faces
• package (what you get with M-x list-packages)
• page-break-lines
• pandoc-mode
• paren-face
• pass
• pdf-tools
• persp-mode
• perspective
• popup
• powerline
• prism (Note for prism.el)
• prescient
• proced
• prodigy
• pulse
• pyim
• quick-peek
• rainbow-delimiters
• rcirc
• rcirc-color
• recursion-indicator
• regexp-builder (also known as re-builder)
• rg (rg.el)
• ripgrep
• rmail
• rst-mode
• ruler-mode
• sesman
• shell-script-mode
• shortdoc
• show-paren-mode
• shr
• side-notes
• sieve-mode
• skewer-mode
• slime (slbd)
• sly
• smart-mode-line
• smerge
• speedbar
• spell-fu
• stripes
• suggest
• switch-window
• swiper
• symbol-overlay
• syslog-mode
• tab-bar-mode
• tab-line-mode
• table (built-in table.el)
• telega
• terraform-mode
• term
• textsec
• transient (pop-up windows such as Magit’s)
• trashed
• tree-sitter
• tty-menu
• tuareg
• typescript
• undo-tree
• vc (vc-dir.el, vc-hooks.el)
• vertico
• vertico-quick
• vimish-fold
• viper
• visible-mark
• visual-regexp
• vtable
• vterm
• vundo
• wcheck-mode
• web-mode
• wgrep
• which-function-mode
• which-key
• whitespace-mode
• window-divider-mode
• window-tool-bar
• writegood-mode
• woman
• xah-elisp-mode
• xterm-color (and ansi-colors)
• yaml-mode
• yasnippet
• ztree

Plus many other miscellaneous faces that are provided by Emacs.

8.2 Indirectly covered packages

These do not require any extra styles because they are configured to inherit from some basic faces or their dependencies which are directly supported by the themes.

• ag
• apropos
• apt-sources-list
• bbdb
• bm
• breakpoint (provided by the built-in gdb-mi.el library)
• buffer-expose
• bufler
• counsel-notmuch
• counsel-org-capture-string
• css-mode
• dashboard (emacs-dashboard)
• define-word
• denote
• disk-usage
• dtache
• dynamic-ruler
• easy-kill
• ebdb
• edit-indirect
• egerrit
• elfeed-summary
• evil-owl
• flyspell-correct
• fortran-mode
• freeze-it
• git-walktree
• goggles
• highlight-defined
• highlight-escape-sequences (hes-mode)
• icomplete-vertical
• i3wm-config-mode
• lin
• minibuffer-line
• no-emoji
• org-remark
• parrot
• perl-mode
• php-mode
• pulsar
• rjsx-mode
• side-hustle
• spell-fu
• swift-mode
• tab-bar-echo-area
• tide
• undo-hl
• vdiff
• vertico-indexed
• vertico-mouse
• xref

9.1 Note on calendar.el weekday and weekend colors

By default, the M-x calendar interface differentiates weekdays from weekends by applying a gray color to the former and a faint red to the latter. The idea for this approach is that the weekend should serve as a subtle warning that no work is supposed to be done on that day, per the design of traditional calendars.

Users who prefer all days to look the same can configure the variable calendar-weekend-days to either use gray of weekdays or the faint red of weekends uniformly.

;; All are treated like weekdays (gray color)
(setq calendar-weekend-days nil)

;; All are treated like weekends (red-faint color)
(setq calendar-weekend-days (number-sequence 0 6))

;; The default marks the Saturday and Sunday as the weekend
(setq calendar-weekend-days '(0 6))

For changes to take effect, the Calendar buffer needs to be generated anew.

9.2 Note on git-gutter in Doom Emacs

The git-gutter and git-gutter-fr packages default to drawing bitmaps for the indicators they display (e.g. bitmap of a plus sign for added lines). In Doom Emacs, these bitmaps are replaced with contiguous lines which may look nicer, but require a change to the foreground of the relevant faces to yield the desired color combinations.

Since this is Doom-specific, we urge users to apply changes in their local setup. Below is some sample code, based on what we cover at length elsewhere in this manual:

Advanced customization.

Use theme colors in code with modus-themes-with-colors.

(defun my-modus-themes-custom-faces (&rest _)
  (modus-themes-with-colors
    (custom-set-faces
     ;; Make foreground the same as background for a uniform bar on
     ;; Doom Emacs.
     ;;
     ;; Doom should not be implementing such hacks because themes
     ;; cannot support them:
     ;; <https://protesilaos.com/codelog/2022-08-04-doom-git-gutter-modus-themes/>.
     `(git-gutter-fr:added ((,c :foreground ,bg-added-fringe)))
     `(git-gutter-fr:deleted ((,c :foreground ,bg-removed-fringe)))
     `(git-gutter-fr:modified ((,c :foreground ,bg-changed-fringe))))))

(add-hook 'modus-themes-after-load-theme-hook #'my-modus-themes-custom-faces)

Using a hook at the post-load-theme phase.

As always, re-load the theme for changes to take effect.

If the above does not work, try this instead:

(after! modus-themes
  (modus-themes-with-colors
    (custom-set-faces
     ;; Make foreground the same as background for a uniform bar on
     ;; Doom Emacs.
     ;;
     ;; Doom should not be implementing such hacks because themes
     ;; cannot support them:
     ;; <https://protesilaos.com/codelog/2022-08-04-doom-git-gutter-modus-themes/>.
     `(git-gutter-fr:added ((,c :foreground ,bg-added-intense)))
     `(git-gutter-fr:deleted ((,c :foreground ,bg-removed-intense)))
     `(git-gutter-fr:modified ((,c :foreground ,bg-changed-intense))))))

9.3 Note on php-mode multiline comments

Depending on your build of Emacs and/or the environment it runs in, multiline comments in PHP with the php-mode package use the font-lock-doc-face instead of font-lock-comment-face.

This seems to make all comments use the appropriate face:

(defun my-multine-comments (&rest _)
  (setq-local c-doc-face-name 'font-lock-comment-face))

(add-hook 'php-mode-hook #'my-multine-comments)

As always, re-load the theme for changes to take effect.

9.4 Note on underlines in compilation buffers

Various buffers that produce compilation results or run tests on code apply an underline to the file names they reference or to relevant messages. Users may consider this unnecessary or excessive.

To outright disable the effect, use this (buffers need to be generated anew):

(setq compilation-message-face nil)

If some element of differentiation is still desired, a good option is to render the affected text with the italic face:

(setq compilation-message-face 'italic)

Configure bold and italic faces.

9.5 Note on inline Latex in Org buffers

Org can work with inline latex and related syntax. To actually fontify those constructs, set the variable org-highlight-latex-and-related to the desired list of values (per its doc string). For example:

(setq org-highlight-latex-and-related '(latex script))

Remember to use M-x org-mode-restart for changes to take effect.

9.6 Note on dimmer.el

The dimmer.el library by Neil Okamoto can be configured to automatically dim the colors of inactive Emacs windows. To guarantee consistent results with the Modus themes, we suggest some tweaks to the default styles, such as in this minimal setup:

(use-package dimmer
  :config
  (setq dimmer-fraction 0.3)
  (setq dimmer-adjustment-mode :foreground)
  (setq dimmer-use-colorspace :rgb)

  (dimmer-mode 1))

Of the above, we strongly recommend the RGB color space because it is the one that remains faithful to the hueness of the colors used by the themes. Whereas the default CIELAB space has a tendency to distort colors in addition to applying the dim effect, which can be somewhat disorienting.

The value of the dimmer-fraction has been selected empirically. Users might prefer to tweak it further (increasing it makes the dim effect more pronounced).

Changing the dimmer-adjustment-mode is a matter of preference. Though because the Modus themes use black and white as their base colors, any other value for that variable will turn the main background gray. This inadvertently leads to the opposite of the intended utility of this package: it draws too much attention to unfocused windows.

9.7 Note on display-fill-column-indicator-mode

The display-fill-column-indicator-mode uses a typographic character to draw its line. This has the downside of creating a dashed line. The dashes are further apart depending on how tall the font’s glyph height is and what integer the line-spacing is set to.

At the theme level we eliminate this effect by making the character one pixel tall: the line is contiguous. Users who prefer the dashed line are advised to change the fill-column-indicator face, as explained elsewhere in this document. For example:

(modus-themes-with-colors
  (custom-set-faces
   `(fill-column-indicator ((,c :foreground ,bg-active)))))

Use theme colors in code with modus-themes-with-colors.

To make the line thicker, set the height to be equal to the base font size instead of the one pixel we use. This is done by specifying a rate instead of an absolute number, as in ‘:height 1.0’ versus ‘:height 1’. For example:

(modus-themes-with-colors
  (custom-set-faces
   `(fill-column-indicator ((,c :height 1.0 :background ,bg-inactive :foreground ,bg-inactive)))))

9.8 Note on highlight-parentheses.el

The highlight-parentheses package provides contextual coloration of surrounding parentheses, highlighting only those which are around the point. The package expects users to customize the applicable colors on their own by configuring certain variables.

To make the Modus themes work as expected with this, we need to use some of the techniques that are discussed at length in the various “Do-It-Yourself” (DIY) sections, which provide insight into the more advanced customization options of the themes.

Advanced customization.

In the following example, we are assuming that the user wants to (i) reuse color variables provided by the themes, (ii) be able to retain their tweaks while switching between modus-operandi and modus-vivendi, and (iii) have the option to highlight either the foreground of the parentheses or the background as well.

We start by defining our own variable, which will serve as a toggle between foreground and background coloration styles:

(defvar my-highlight-parentheses-use-background t
  "Prefer `highlight-parentheses-background-colors'.")

Then we can update our preference with this:

;; Set to nil to disable backgrounds.
(setq my-highlight-parentheses-use-background nil)

To reuse colors from the themes, we must wrap our code in the modus-themes-with-colors macro. Our implementation must interface with the variables highlight-parentheses-background-colors and/or highlight-parentheses-colors.

So we can have something like this (the doc string of modus-themes-with-colors explains where the names of the colors can be found):

(modus-themes-with-colors
    ;; Our preference for setting either background or foreground
    ;; styles, depending on `my-highlight-parentheses-use-background'.
    (if my-highlight-parentheses-use-background

        ;; Here we set color combinations that involve both a background
        ;; and a foreground value.
        (setq highlight-parentheses-background-colors (list bg-cyan-intense
                                                            bg-magenta-intense
                                                            bg-green-intense
                                                            bg-yellow-intense)
              highlight-parentheses-colors (list cyan
                                                 magenta
                                                 green
                                                 yellow))

      ;; And here we pass only foreground colors while disabling any
      ;; backgrounds.
      (setq highlight-parentheses-colors (list green-intense
                                               magenta-intense
                                               blue-intense
                                               red-intense)
            highlight-parentheses-background-colors nil)))

;; Include this if you also want to make the parentheses bold:
(set-face-attribute 'highlight-parentheses-highlight nil :inherit 'bold)

;; Our changes must be evaluated before enabling the relevant mode, so
;; this comes last.
(global-highlight-parentheses-mode 1)

For our changes to persist while switching between the Modus themes, we need to include them in a function which can then get passed to modus-themes-after-load-theme-hook. This is the complete implementation:

;; Configurations for `highlight-parentheses':
(require 'highlight-parentheses)

(defvar my-highlight-parentheses-use-background t
  "Prefer `highlight-parentheses-background-colors'.")

(setq my-highlight-parentheses-use-background nil) ; Set to nil to disable backgrounds

(defun my-modus-themes-highlight-parentheses (&rest _)
  (modus-themes-with-colors
    ;; Our preference for setting either background or foreground
    ;; styles, depending on `my-highlight-parentheses-use-background'.
    (if my-highlight-parentheses-use-background

        ;; Here we set color combinations that involve both a background
        ;; and a foreground value.
        (setq highlight-parentheses-background-colors (list bg-cyan-intense
                                                            bg-magenta-intense
                                                            bg-green-intense
                                                            bg-yellow-intense)
              highlight-parentheses-colors (list cyan
                                                 magenta
                                                 green
                                                 yellow))

      ;; And here we pass only foreground colors while disabling any
      ;; backgrounds.
      (setq highlight-parentheses-colors (list green-intense
                                               magenta-intense
                                               blue-intense
                                               red-intense)
            highlight-parentheses-background-colors nil)))

  ;; Include this if you also want to make the parentheses bold:
  (set-face-attribute 'highlight-parentheses-highlight nil :inherit 'bold)

  ;; Our changes must be evaluated before enabling the relevant mode, so
  ;; this comes last.
  (global-highlight-parentheses-mode 1))

(add-hook 'modus-themes-after-load-theme-hook #'my-modus-themes-highlight-parentheses)

Using a hook at the post-load-theme phase.

As always, re-load the theme for changes to take effect.

9.9 Note on mmm-mode.el background colors

The faces used by mmm-mode.el are expected to have a colorful background, while they should not touch any foreground value. The idea is that they must not interfere with existing fontification. Those background colors need to be distinct from each other, such as an unambiguous red juxtaposed with a clear blue.

While this design may be internally consistent with the raison d’être of that library, it inevitably produces inaccessible color combinations.

There are two competing goals at play:

1. Legibility of the text, understood as the contrast ratio between the background and the foreground.
2. Semantic precision of each face which entails faithfulness to color-coding of the underlying background.

As the Modus themes are designed with the express purpose of conforming with the first point, we have to forgo the apparent color-coding of the background elements. Instead we use subtle colors that do not undermine the legibility of the affected text while they still offer a sense of added context.

Users who might prefer to fall below the minimum 7:1 contrast ratio in relative luminance (the accessibility target we conform with), can opt to configure the relevant faces on their own.

Use theme colors in code with modus-themes-with-colors.

This example uses more vivid background colors, though it comes at the very high cost of degraded legibility.

(modus-themes-with-colors
  (custom-set-faces
   `(mmm-cleanup-submode-face ((,c :background ,bg-yellow-intense)))
   `(mmm-code-submode-face ((,c :background ,bg-inactive)))
   `(mmm-comment-submode-face ((,c :background ,bg-blue-intense)))
   `(mmm-declaration-submode-face ((,c :background ,bg-cyan-intense)))
   `(mmm-default-submode-face ((,c :background ,bg-dim)))
   `(mmm-init-submode-face ((,c :background ,bg-magenta-intense)))
   `(mmm-output-submode-face ((,c :background ,bg-red-intense)))
   `(mmm-special-submode-face ((,c :background ,bg-green-intense)))))

9.10 Note on prism.el

This package by Adam Porter, aka “alphapapa” or “github-alphapapa”, implements an alternative to the typical coloration of code. Instead of highlighting the syntactic constructs, it applies color to different levels of depth in the code structure.

As prism.el offers a broad range of customizations, we cannot style it directly at the theme level: that would run contrary to the spirit of the package. Instead, we may offer preset color schemes. Those should offer a starting point for users to adapt to their needs.

In the following code snippets, we employ the modus-themes-with-colors macro: Use theme colors in code with modus-themes-with-colors.

These are the minimum recommended settings with 16 colors:

(setq prism-num-faces 16)

(prism-set-colors
  :desaturations '(0) ; do not change---may lower the contrast ratio
  :lightens '(0)      ; same
  :colors (modus-themes-with-colors
            (list fg-main
                  magenta
                  cyan-cooler
                  magenta-cooler
                  blue
                  magenta-warmer
                  cyan-warmer
                  red-cooler
                  green
                  fg-main
                  cyan
                  yellow
                  blue-warmer
                  red-warmer
                  green-cooler
                  yellow-faint)))

With 8 colors:

(setq prism-num-faces 8)

(prism-set-colors
  :desaturations '(0) ; do not change---may lower the contrast ratio
  :lightens '(0)      ; same
  :colors (modus-themes-with-colors
            (list blue
                  magenta
                  magenta-cooler
                  cyan-cooler
                  fg-main
                  blue-warmer
                  red-cooler
                  cyan)))

And this is with 4 colors, which produces results that are the closest to the themes’ default aesthetic:

(setq prism-num-faces 4)

(prism-set-colors
  :desaturations '(0) ; do not change---may lower the contrast ratio
  :lightens '(0)      ; same
  :colors (modus-themes-with-colors
            (list blue
                  magenta
                  magenta-cooler
                  green-warmer)))

If you need to apply desaturation and lightening, you can use what the prism.el documentation recommends, like this (adapting to the examples with the 4, 8, 16 colors):

(prism-set-colors
  :desaturations (cl-loop for i from 0 below 16 collect (* i 2.5))
  :lightens (cl-loop for i from 0 below 16 collect (* i 2.5))
  :colors (modus-themes-with-colors
            (list fg-main
                  cyan-cooler
                  magenta-cooler
                  magenta)))

9.11 Note on company-mode overlay pop-up

By default, the company-mode pop-up that lists completion candidates is drawn using an overlay. This creates alignment issues every time it is placed above a piece of text that has a different height than the default.

The solution recommended by the project’s maintainer is to use an alternative front-end for drawing the pop-up which draws child frames instead of overlays.²³

Also consider the corfu package.

9.12 Note on ERC escaped color sequences

The built-in IRC client erc has the ability to colorize any text using escape sequences that start with ‘^C’ (inserted with C-q C-c) and are followed by a number for the foreground and background.⁴ Possible numbers are 0-15, with the first entry being the foreground and the second the background, separated by a comma. Like this ‘^C1,6’. The minimum setup is this:

(add-to-list 'erc-modules 'irccontrols)
(setq erc-interpret-controls-p t
      erc-interpret-mirc-color t)

As this allows users the chance to make arbitrary combinations, it is impossible to guarantee a consistently high contrast ratio. All we can we do is provide guidance on the combinations that satisfy the accessibility standard of the themes:

Modus Operandi

Use foreground color 1 for all backgrounds from 2-15. Like so: C-q C-c1 where ‘N’ is the background.

Modus Vivendi

Use foreground color 0 for all backgrounds from 2-13. Use foreground ‘1’ for backgrounds 14, 15.

Colors 0 and 1 are white and black respectively. So combine them together, if you must.

9.13 Note on powerline or spaceline

Both Powerline and Spaceline package users will likely need to use the command powerline-reset whenever they make changes to their themes and/or mode line setup.

9.14 Note on SHR colors

Emacs’ HTML rendering library (shr.el) may need explicit configuration to respect the theme’s colors instead of whatever specifications the webpage provides.

Consult the doc string of shr-use-colors.

9.15 Note on SHR fonts

By default, packages that build on top of the Simple HTML Remember (shr) use proportionately spaced fonts. This is controlled by the user option shr-use-fonts, which is set to non-nil by default. To use the standard font instead, set that variable to nil.

Font configurations for Org and others.

Packages affected by this are:

• elfeed
• ement
• eww

This is a non-exhaustive list.

9.16 Note on Ement colors and fonts

The ement.el library by Adam Porter (also known as “alphapapa”) defaults to a method of colorizing usernames in a rainbow style. This is controlled by the user option ement-room-prism and can be disabled with:

(setq ement-room-prism nil)

The contrast ratio of these colors is governed by another user option: ement-room-prism-minimum-contrast. By default, it is set to 6 which is slightly below our nominal target. Try this instead:

(setq ement-room-prism-minimum-contrast 7)

With regard to fonts, Ement depends on shr (Note on SHR fonts).

Since we are here, here is an excerpt from Ement’s source code:

(defcustom ement-room-prism-minimum-contrast 6
  "Attempt to enforce this minimum contrast ratio for user faces.
This should be a reasonable number from, e.g. 0-7 or so."
  ;; Prot would almost approve of this default.  :) I would go all the way
  ;; to 7, but 6 already significantly dilutes the colors in some cases.
  :type 'number)

Yes, I do approve of that default. Even a 4.5 (the WCAG AA rating) would be a good baseline for many themes and/or user configurations. Our target is the highest of the sort, though we do not demand that everyone conforms with it.

9.17 Note on pdf-tools link hints

Hints are drawn by ImageMagick, not Emacs, i.e., ImageMagick doesn’t know about the hint face unless you tell ImageMagick about it. By default, only the foreground and background color attributes are passed. The below snippet adds to those the various font attributes. As it queries various faces, specifically pdf-links-read-link and the faces it inherits, it needs to be added to your initialization file after you’ve customized any faces.

(use-package pdf-links
  :config
  (let ((spec
         (apply #'append
                (mapcar
                 (lambda (name)
                   (list name
                         (face-attribute 'pdf-links-read-link
                                         name nil 'default)))
                 '(:family :width :weight :slant)))))
    (setq pdf-links-read-link-convert-commands
          `("-density"    "96"
            "-family"     ,(plist-get spec :family)
            "-stretch"    ,(let* ((width (plist-get spec :width))
                                  (name (symbol-name width)))
                             (replace-regexp-in-string "-" ""
                                                       (capitalize name)))
            "-weight"     ,(pcase (plist-get spec :weight)
                             ('ultra-light "Thin")
                             ('extra-light "ExtraLight")
                             ('light       "Light")
                             ('semi-bold   "SemiBold")
                             ('bold        "Bold")
                             ('extra-bold  "ExtraBold")
                             ('ultra-bold  "Black")
                             (_weight      "Normal"))
            "-style"      ,(pcase (plist-get spec :slant)
                             ('italic  "Italic")
                             ('oblique "Oblique")
                             (_slant   "Normal"))
            "-pointsize"  "%P"
            "-undercolor" "%f"
            "-fill"       "%b"
            "-draw"       "text %X,%Y '%c'"))))

9.18 Note on the Notmuch logo

By default, the “hello” buffer of Notmuch includes a header with the programs’ logo and a couple of buttons. The logo has the effect of enlarging the height of the line, which negatively impacts the shape of those buttons. Disabling the logo fixes the problem:

(setq notmuch-show-logo nil)

9.19 Note on goto-address-mode faces

The built-in goto-address-mode uses heuristics to identify URLs and email addresses in the current buffer. It then applies a face to them to change their style. Some packages, such as notmuch, use this minor-mode automatically.

The faces are not declared with defface, meaning that it is better that the theme does not modify them. The user is thus encouraged to consider including (or equivalent) this in their setup:

(setq goto-address-url-face 'link
      goto-address-url-mouse-face 'highlight
      goto-address-mail-face 'link
      goto-address-mail-mouse-face 'highlight)

My personal preference is to set goto-address-mail-face to nil, as it otherwise adds too much visual noise to the buffer (email addresses stand out more, due to the use of the uncommon ‘@’ character but also because they are often enclosed in angled brackets).

10.1 Is the contrast ratio about adjacent colors?

The minimum contrast ratio in relative luminance that the themes conform with always refers to any given combination of background and foreground colors. If we have some blue colored text next to a magenta one, both against a white background, we do not mean to imply that blue:magenta is 7:1 in terms of relative luminance. Rather, we state that blue:white and magenta:white each are 7:1 or higher.

The point of reference is always the background. Because colors have about the same minimum distance in luminance from their backdrop, they necessarily are fairly close to each other in this measure. A possible blue:magenta combination would naturally be around 1:1 in contrast of the sort here considered.

To differentiate between sequential colors, we rely on hueness by mapping contrasting hues to adjacent constructs, while avoiding exaggerations. A blue next to a magenta can be told apart regardless of their respective contrast ratio against their common background. Exceptions would be tiny characters in arguably not so realistic cases, such as two dots drawn side-by-side which for some reason would need to be colored differently. They would still be legible though, which is the primary objective of the Modus themes.

10.2 What does it mean to avoid exaggerations?

The Modus themes are designed with restraint, so that their default looks do not overdo it with the application of color.

Customization Options.

This is the non-quantifiable aspect of the themes’ design: the artistic part, if you will. There are a lot of cases where color can be used inconsiderately, without accounting for layout, typographic, or other properties of the presentation. For example, two headings with distinct markers, such as leading asterisks in Org buffers, do not have to have highly contrasting hues between them in order to be told apart: the added element of contrast in hueness does not contribute significantly more to the distinction between the headings than colors whose hues are relatively closer to each other in the color space.

Exaggerations can be hard to anticipate or identify. Multiple shades of blue and magenta in the same context may not seem optimal: one might think that it would be better to use highly contrasting hues to ensure that all colors stand out, such as by placing blue next to yellow, next to magenta, and green. That would, however, be a case of design for its own sake; a case where color is being applied without consideration of its end results in the given context. Too many contrasting hues in close proximity force an erratic rate to how the eye jumps from one piece of text to the next. Whereas multiple shades of, say, blue and magenta can suffice to tell things apart and avoid excess coloration: a harmonious rhythm.

10.3 Why are colors mostly variants of blue, magenta, cyan?

Due to the innate properties of color, some options are better than others for the accessibility purposes of the themes, the stylistic consistency between modus-operandi and modus-vivendi, and the avoidance of exaggerations in design.

What does it mean to avoid exaggerations?

What we describe as color is a function of three distinct channels of light: red, green, blue. In hexadecimal RGB notation, a color value is read as three pairs of red, green, and blue light: ‘#RRGGBB’. Of those three, the most luminant is green, while the least luminant is blue.

The three basic colors represent each of the channels of light. They can be intermixed to give us six colors: red and green derive yellow, green and blue make cyan, red and blue turn into magenta.

We can test the luminance of each of those against white and black to get a sense of how not all colors are equally good for accessibility (white is ‘#ffffff’, which means that all three light channels are fully luminated, while black is ‘#000000’ meaning that no light is present (notwithstanding display technology)).

| Name    |         | #ffffff | #000000 |
|---------+---------+---------+---------|
| red     | #ff0000 |    4.00 |    5.25 |
| yellow  | #ffff00 |    1.07 |   19.56 |
| green   | #00ff00 |    1.37 |   15.30 |
| cyan    | #00ffff |    1.25 |   16.75 |
| blue    | #0000ff |    8.59 |    2.44 |
| magenta | #ff00ff |    3.14 |    6.70 |

Measure color contrast.

By reading this table we learn that every color that has a high level of green light (green, yellow, cyan) is virtually unreadable against a white background and, conversely, can be easily read against black.

We can then infer that red and blue, in different combinations, with green acting as calibrator for luminance, will give us fairly moderate colors that pass the 7:1 target. Blue with a bit of green produce appropriate variants of cyan. Similarly, blue combined with some red and hints of green give us suitable shades of purple.

Due to the need of maintaining some difference in hueness between adjacent colors, it is not possible to make red, green, and yellow the main colors, because blue cannot be used to control their luminance and, thus the relevant space will shrink considerably.

Is the contrast ratio about adjacent colors?

This phenomenon is best illustrated by the following table that measures the relative luminance of shades of red, yellow, magenta against white:

|         | #ffffff |
|---------+---------|
| #990000 |    8.92 |
| #995500 |    5.75 |
| #990099 |    7.46 |

We notice that equal values of red and blue light in ‘#990099’ (magenta shade) do not lead to a considerable change in luminance compared with ‘#990000’ (red variant). Whereas less amount of green light in ‘#995500’ leads to a major drop in luminance relative to white. It follows that using the green channel of light to calibrate the luminance of colors is more effective than trying to do the same with either red or blue (the latter is the least effective in that regard).

When we need to work with several colors, it is always better to have sufficient manoeuvring space, especially since we cannot pick arbitrary colors but only those that satisfy the accessibility objectives of the themes.

As for why we do not mostly use green, yellow, cyan for the dark theme, it is because those colors are far more luminant than their counterparts on the other side of the spectrum, so to ensure that they all have about the same contrast ratios we would have to alter their hueness considerably. In short, the effect would not be optimal as it would lead to exaggerations. Plus, it would make modus-vivendi look completely different than modus-operandi, to the effect that the two could not be properly considered part of the same project.

10.4 What is the best setup for legibility?

The Modus themes can be conceptually simplified as combinations of color values that account for relative luminance and inner harmony. Those qualities do not guarantee that every end-user will have the same experience, due to differences between people, but also because of variances in hardware capabilities and configurations. For the purposes of this document, we may only provide suggestions pertaining to the latter case.

modus-operandi is best used outdoors or in a room that either gets direct sunlight or has plenty of light. Whereas modus-vivendi works better when there is not a lot of sunshine or the room has a source of light that is preferably a faint and/or warm one. It is possible to use modus-operandi at night and modus-vivendi during the day, though that will depend on several variables, such as one’s overall perception of color, the paint on the walls and how that contributes to the impression of lightness in the room, the sense of space within the eye’s peripheral vision, hardware specifications, and environmental factors.

In general, an additional source of light other than that of the monitor can help reduce eye strain: the eyes are more relaxed when they do not have to focus on one point to gather light.

The monitor’s display settings must be accounted for. Gamma values, in particular, need to be calibrated to neither amplify nor distort the perception of black. Same principle for sharpness, brightness, and contrast as determined by the hardware, which all have an effect on how text is read on the screen.

There are software level methods on offer, such as the XrandR utility for the X Window System (X.org), which can make gamma corrections for each of the three channels of light (red, green, blue). For example:

xrandr --output LVDS1 --brightness 1.0 --gamma 0.76:0.75:0.68

Typography is another variable. Some font families are blurry at small point sizes. Others may have a regular weight that is lighter (thinner) than that of their peers which may, under certain circumstances, cause a halo effect around each glyph.

The gist is that legibility cannot be fully solved at the theme level. The color combinations may have been optimized for accessibility, though the remaining contributing factors in each case need to be considered in full.

10.5 Are these color schemes?

No, the Modus themes are not color schemes.

A color scheme is a collection of colors. A good color scheme is a combination of colors with an inner logic or abstract structure.

A theme is a set of patterns that are applied across different contexts. A good theme is one that does so with consistency, though not uniformity.

In practical terms, a color scheme is what one uses when, for example, they replace the first sixteen escape sequences of a terminal emulator with color values of their preference. The terminal offers the option to choose, say, the exact value of what counts as “red”, but does not provide the means to control where that is mapped to and whether it should also have other qualities such as a bold weight for the underlying text or an added background color. In contradistinction, Emacs uses constructs known as “faces” which allow the user/developer to specify where a given color will be used and whether it should be accompanied by other typographic or stylistic attributes.

By configuring the multitude of faces on offer we thus control both which colors are applied and how they appear in their context. When a package wants to render each instance of “foo” with the “bar” face, it is not requesting a specific color, which makes things considerably more flexible as we can treat “bar” in its own right without necessarily having to use some color value that we hardcoded somewhere.

Which brings us to the distinction between consistency and uniformity where our goal is always the former: we want things to look similar across all interfaces, but we must never force a visual identity where that runs contrary to the functionality of the given interface. For instance, all links are underlined by default yet there are cases such as when viewing listings of emails in Gnus (and Mu4e, Notmuch) where (i) it is already understood that one must follow the indicator or headline to view its contents and (ii) underlining everything would make the interface virtually unusable.

Again, one must exercise judgement in order to avoid discrimination, where “discrimination” refers to:

• The treatment of substantially different magnitudes as if they were of the same class.
• Or the treatment of the same class of magnitudes as if they were of a different class.

(To treat similar things differently; to treat dissimilar things alike.)

If, in other words, one is to enforce uniformity without accounting for the particular requirements of each case—the contextual demands for usability beyond matters of color—they are making a not-so-obvious error of treating different cases as if they were the same.

The Modus themes prioritize “thematic consistency” over abstract harmony or regularity among their applicable colors. In concrete terms, we do not claim that, say, our yellows are the best complements for our blues because we generally avoid using complementary colors side-by-side, so it is wrong to optimize for a decontextualised blue+yellow combination. Not to imply that our colors do not work well together because they do, just to clarify that consistency of context is what themes must strive for, and that requires widening the scope of the design beyond the particularities of a color scheme.

Long story short: color schemes and themes have different requirements. Please do not conflate the two.

10.6 Port the Modus themes to other platforms?

There is no plan to port the themes to other platforms or text editors. I (Protesilaos) only use GNU Emacs and thus cannot maintain code that targets software I am either not familiar with or am not using on a daily basis.

While it is possible to produce a simulacrum based on a given template, doing so would run contrary to how this project is maintained where details matter greatly.

Each program has its own requirements so it won’t always be possible—or indeed desirable—to have 1:1 correspondence between what applies to Emacs and what should be done elsewhere. No port should ever strive to be a copy of the Emacs implementation, as no other program is an Emacs equivalent, but instead try to follow the spirit of the design. For example, some of the customization options accept a list as their value, or an alist, which may not be possible to reproduce on other platforms.

Customization options.

In other words, if something must be done differently on a certain editor then that is acceptable so long as (i) the accessibility standards are not compromised and (ii) the overall character of the themes remains consistent.

The former criterion should be crystal clear as it pertains to the scientific foundations of the themes: high legibility and taking care of the needs of users with red-green/blue-yellow color deficiency (deuteranopia and tritanopia) by avoiding red+green color coding paradigms and/or by providing yellow+blue variants for deuteranopia and red+cyan for tritanopia (Overview).

The latter criterion is the “je ne sais quoi” of the artistic aspect of the themes, which is partially fleshed out in this manual.

Frequently Asked Questions.

With regard to the artistic aspect (where “art” qua skill may amount to an imprecise science), there is no hard-and-fast rule in effect as it requires one to exercize discretion and make decisions based on context-dependent information or constraints. As is true with most things in life, when in doubt, do not cling on to the letter of the law but try to understand its spirit.

For a trivial example: the curly underline that Emacs draws for spelling errors is thinner than, e.g., what a graphical web browser has, so if I was to design for an editor than has a thicker curly underline I would make the applicable colors less intense to counterbalance the typographic intensity of the added thickness.

With those granted, if anyone is willing to develop a port of the themes, they are welcome to contact me and I will do my best to help them in their efforts.

11.1 Sources of the themes

• Package name (GNU ELPA): modus-themes
• Official manual: https://protesilaos.com/emacs/modus-themes
• Change log: https://protesilaos.com/emacs/modus-themes-changelog
• Color palette: https://protesilaos.com/emacs/modus-themes-colors
• Sample pictures: https://protesilaos.com/emacs/modus-themes-pictures
• Git repo on SourceHut: https://git.sr.ht/~protesilaos/modus-themes
  • Mirrors:
    • GitHub: https://github.com/protesilaos/modus-themes
    • GitLab: https://gitlab.com/protesilaos/modus-themes
• Mailing list: https://lists.sr.ht/~protesilaos/modus-themes
• Backronym: My Old Display Unexpectedly Sharpened … themes

11.2 Issues you can help with

A few tasks you can help with by sending an email to the general modus-themes public mailing list.

• Suggest refinements to packages that are covered.
• Report packages not covered thus far.
• Report bugs, inconsistencies, shortcomings.
• Help expand the documentation of covered-but-not-styled packages.
• Suggest refinements to the color palette.
• Help expand this document or any other piece of documentation.
• Send patches for code refinements (if you need, ask me for help with Git—we all start out as beginners).

Patches require copyright assignment to the FSF.

It is preferable that your feedback includes some screenshots, GIFs, or short videos, as well as further instructions to reproduce a given setup. Though this is not a requirement.

Whatever you do, bear in mind the overarching objective of the Modus themes: to keep a contrast ratio that is greater or equal to 7:1 between background and foreground colors. If a compromise is ever necessary between aesthetics and accessibility, it shall always be made in the interest of the latter.

11.3 Patches require copyright assignment to the FSF

Code contributions are most welcome. For any major edit (more than 15 lines, or so, in aggregate per person), you need to make a copyright assignment to the Free Software Foundation. This is necessary because the themes are part of the upstream Emacs distribution: the FSF must at all times be in a position to enforce the GNU General Public License.

Copyright assignment is a simple process. Check the request form below (please adapt it accordingly). You must write an email to the address mentioned in the form and then wait for the FSF to send you a legal agreement. Sign the document and file it back to them. This could all happen via email and take about a week. You are encouraged to go through this process. You only need to do it once. It will allow you to make contributions to Emacs in general.

Please email the following information to assign@gnu.org, and we
will send you the assignment form for your past and future changes.

Please use your full legal name (in ASCII characters) as the subject
line of the message.

REQUEST: SEND FORM FOR PAST AND FUTURE CHANGES

[What is the name of the program or package you're contributing to?]

GNU Emacs

[Did you copy any files or text written by someone else in these changes?
Even if that material is free software, we need to know about it.]

Copied a few snippets from the same files I edited.  Their author,
Protesilaos Stavrou, has already assigned copyright to the Free Software
Foundation.

[Do you have an employer who might have a basis to claim to own
your changes?  Do you attend a school which might make such a claim?]


[For the copyright registration, what country are you a citizen of?]


[What year were you born?]


[Please write your email address here.]


[Please write your postal address here.]





[Which files have you changed so far, and which new files have you written
so far?]

B.1 Function index

B.2 Variable index

B.3 Concept index